Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Tom White on November 22, 2012, 02:11:35 pm
-
Anyone know where I can get these fittings? The pic probably isn't great; it's where the RO pipes go into the filter chambers.
(http://img.photobucket.com/albums/v737/tosh0987/DSCF3251-1-1.jpg)
Or at least tell me what size they are?
-
Anyone know where I can get these fittings? The pic probably isn't great; it's where the RO pipes go into the filter chambers.
(http://img.photobucket.com/albums/v737/tosh0987/DSCF3251-1-1.jpg)
Or at least tell me what size they are?
Have a look on collins water products and speak to a guy called lee. Really helpful and all knowing to all things r.o....
-
Hey, thanks Pride Clean; I looked at the site and think I've found 'em.
Are they these housing connectors?
https://collinswaterproducts.co.uk/product_info.php?cPath=124&products_id=179&osCsid=b39b4fdfc2a0cc366ed11f26548e60c2
What do you reckon?
-
(Ive re written this twice lol)
There the ones mate. I cant see the image the best though (on my phone) to see if its the same. Give them a ring mate, theyve always helped me out regarding fittings etc....
-
Pure Freedom are always good too Tosh.
-
And, er, what has the wind got to do with an RO?
-
And, er, what has the wind got to do with an RO?
It blew the ruddy thing over; Wor Lass just had it stood up; her fault obviously, not the wind's fault; sorry.
-
(Ive re written this twice lol)
There the ones mate. I cant see the image the best though (on my phone) to see if its the same. Give them a ring mate, theyve always helped me out regarding fittings etc....
Cheers, thanks, just phoned and confirmed; that's a pint I owe you.
Great forum. Thanks. ;D
-
Is it the 1 that screws into the filter housing?
If so I have 1 not sure if I can find more.
If your stuck I have a spare r o you can borrow.
-
(Ive re written this twice lol)
There the ones mate. I cant see the image the best though (on my phone) to see if its the same. Give them a ring mate, theyve always helped me out regarding fittings etc....
Cheers, thanks, just phoned and confirmed; that's a pint I owe you.
Great forum. Thanks. ;D
No probs mate, ive had my fair share of help from a few on the forum, glad i could help
-
Is it the 1 that screws into the filter housing?
If so I have 1 not sure if I can find more.
If your stuck I have a spare r o you can borrow.
Thanks, RZ, that's good of you, but no, it's sorted. For a short term solution I just reconfigured the RO pipes so the mains tap water goes directly into the RO filters (no pre-filtering) and then out via the DI chamber.
Obviously this'll lessen the life span of my RO filters, but it'll do till the order arrives.
-
Hi Tosh you can get a part from B&Q which will screw into the hole it is a male hoselock tap fitting with a female end, you will have to connect an ordinary hoselock connector to it after inserting the male fitting
-
sorry Tosh
Just looked looks like the wrong size
http://www.diy.com/nav/garden/garden-care-watering/watering-irrigation/sprinklers___hoses/-specificproducttype-connectors/Hozelock-3-4in-Male-Adaptor-2289B5000-Yellow-9986448
-
This might help
http://plumbing4home.com/12-hozelock-compatibile-male-threaded-tap-connector-hose-connector
-
if your stuck for water tosh just pop over
-
Cheers, all, it's all sorted now.
Fanks!