Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: bentsbrook27 on November 21, 2012, 08:45:18 am

Title: help wrong connection
Post by: bentsbrook27 on November 21, 2012, 08:45:18 am

put wrong terminals on battery this morning after charging last night do you thing blown varistream or pump or both

Title: Re: help wrong connection
Post by: d s windowcleaning on November 21, 2012, 08:48:34 am

mate did that a couple of years ago and his digi varistream never worked again .

Title: Re: help wrong connection
Post by: bentsbrook27 on November 21, 2012, 09:04:15 am

Was his pump ok did he just replace varistream or try one of those new type logic thingsor whatever there called

Title: Re: help wrong connection
Post by: d s windowcleaning on November 21, 2012, 09:13:59 am

yes his pump was ok it was just the varistream , he just used the pump with a flow valve after that .

Title: Re: help wrong connection
Post by: bentsbrook27 on November 21, 2012, 09:29:53 am

Gonna have it tested by a mate then make decision later ta!

Title: Re: help wrong connection
Post by: lozsing on November 21, 2012, 09:40:06 am

is there any fuses you may have blown

Title: Re: help wrong connection
Post by: Dave Willis on November 21, 2012, 10:01:18 am

if you are lucky the inline fuse might have blown in time to save the controller.

Title: Re: help wrong connection
Post by: bentsbrook27 on November 21, 2012, 10:44:30 am

its dead took fuse out while back so it took full force , rung gardners ordered liquid logic very expensive mistake ta!! anyway

Title: Re: help wrong connection
Post by: lozsing on November 21, 2012, 02:30:49 pm

Have you looked inside to see if there is any wiring on the pcb that you might be able to repair