Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: Russ Chadd on November 18, 2012, 04:32:05 pm

Title: Enz - All
Post by: Russ Chadd on November 18, 2012, 04:32:05 pm

Can anyone tell me the correct mixing / dilution of Enz - All if used in a hydroforce which is set to 9:1, this is the info i lifter from the website :

pH @ use: 11.5 - 12.5

Coverage: Up to 200 square metres per 42g

Dilution: 1 scoop to 4L hot water. T/M 10 scoops to 4L water

Appearance: Off-white powder

Fragrance: Floral

Packaging: 1 x 2.5kg (case of 4)

Title: Re: Enz - All
Post by: Nigel_W on November 18, 2012, 04:46:26 pm

Russ,

If the normal dilution is 1 scoop to 4 litres  of hot water then you would just add 9 scoops to 4 litres of water to make your stock for the hydroforce.

Nigel

ps if you want to fill the hydroforce full (eg 5 litres) add an extra 2.25 scoops for the extra litre.

Title: Re: Enz - All
Post by: Russ Chadd on November 18, 2012, 05:07:27 pm

Thanks Nigel

I am assuming a scoop is 15 mg ?

Title: Re: Enz - All
Post by: Jamie Pearson on November 18, 2012, 08:26:31 pm

43ml I think. It says on bottom of scoop.

Title: Re: Enz - All
Post by: Russ Chadd on November 18, 2012, 08:27:51 pm

It didnt come with a scoop so im a little lost!

Title: Re: Enz - All
Post by: Jamie Pearson on November 18, 2012, 08:29:21 pm

Tip it on its side and give it a good shake. The scoop should appear. In 20 years I have never heard of someone getting one without a scoop. If you have a blue prochem scoop 3 of them makes up 1 Chemspec scoop.

Title: Re: Enz - All
Post by: Russ Chadd on November 18, 2012, 08:56:34 pm

Haha.. cheers!

Title: Re: Enz - All
Post by: Carpet Dawg on November 18, 2012, 09:05:19 pm

I didn't get a scoop in a spray and go once  :'(. Bought a pack of six. Used one from my formula 90

Title: Re: Enz - All
Post by: Nick Attwood on November 19, 2012, 12:33:21 am

All Chemspec products when refering to a scoop, is there standard 43ml scoop. As Jamie said.