Clean It Up
UK Floor Cleaning Forum => Hard Floor Cleaning Forum => Topic started by: derek west on November 06, 2012, 03:35:26 pm
-
dilemma time.
customer just rang and i'm going to look on saturday.
lime stone floor freshly laid in august. fitters have got grout haze over the tiles and then sealed it with an impregnating sealer, (don't know which one)
so what would your procedure be?
and at what sort of cost per sq meter?
-
Honed or Polished Limestone?
Kev Martin
Tiling Logistics
Marblelife Ltd
-
don't know so give me both versions ;) ;D
-
Pricey Way or Cheap as possible?
-
ha ha, both so thats four ways now.
-
OK
Strip with Aqua Mix Sealing & Coating Remover
Then a mix of Heavy duty and nanoscrub (as you can's use acid on Limestone as I'm sure you know)
Then you may have to repolish Supershine1,2,3 then polish
Seal
Note: Some Limestone are a pig to polish and using supershine may lose you clariety in the stone and may be difficult to polish
My Prefered method
Strip with Aqua Mix Sealing & Coating Remover
Then honing powder 220/320 with brush
Then Honing powder 400/500 with white pad or natural hair pad
Then if polish is desired supershine no3 Then polish
Seal
Again this method can have implications if you polish it then the only way to overcome this is to use resin bonded diamonds right up through the grits but then you have lippage issues!
Which brings us to a more Expensive route
and that is grinding the whole floor flat with metal sintered diamonds the re-hone/polish through with resin bonded diamonds
-
cheers tony, if i get the job i will be in touch for the gear. i'll add £200 costs to my day rate x2 and thats the price. let me know if i'm way out on the first 2 methods costings.
-
I would need to know m2
-
roughly about 45 sq meters