Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: stevef on February 01, 2006, 01:28:37 pm

Title: Microbore / varistream question
Post by: stevef on February 01, 2006, 01:28:37 pm

Why when I disconect my pole from the microbore hose dose the varistream not always stop. It dose some times. I dont want to burn out my pump (75 psi) this never hapend with the 1/2 hose, has this happend to anyone else   (60m hose)

Better get back to work for another hour or two

Steve

Title: Re: Microbore / varistream question
Post by: Moderator David@stives on February 01, 2006, 03:05:18 pm

Its just the pump making up the lost pressure in the system.
When it has got back to operating pressure it should stop

Title: Re: Microbore / varistream question
Post by: dai on February 01, 2006, 07:02:49 pm

I had this problem too. If you open the Varistream box there's a little dial inside.
 The dial is marked in letters. Turn the dial back anti clockwise one letter. If you still have the problem move it back one more letter. I only had to turn it back one letter and I use 6mm bore too. Dai

Title: Re: Microbore / varistream question
Post by: stevef on February 01, 2006, 08:03:10 pm

Thanks dai I will give that a try in the morning and see how it goes, I dont want to burn my pump out

Steve