Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: John pearce on October 17, 2012, 12:02:35 am
-
Sorry if this has been posted before, but just wondered if you rinsed the frames with the windows , or rinsed the frames then washed the windows, wipe the top of frames with your brush turned off, then finished rinsing each glass and so on,
I prefer to rinse the hole lot because its quicker, but sometimes get problems with that spotting that starts from the top black rubber seal and runs down, even though ive scrubbed and rinsed for quite a while, ive started wiping with brush but its slowing me up, thats what i miss with trad, you see the finished result straight away. (its not all the time, thats what annouying >:(.... john. :)
-
On first cleans I scrub the whole lot and clean the glass a second time and if they were filthy rinse the glass. But I don't usually rinse frames.
With established work I'll clean the frames and the glass and then rinse the glass.
You'll get to know what work needs what by the way the water runs down the glass.
-
imo rinse everything,leave no stone unturned
-
On maintenance cleans
Scrub frame
Scrub glass
Rinse glass
unless windows are two parts i.e. with a plastic bar going horizentally thru window then
Scrub All of the frame
go along and wash top half of glass on say 3 or 4 windows
then go back to 1st window and do glass on bottom halfs of all that have had tops done