Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: jamie bennett on September 24, 2012, 06:17:40 pm
-
Hi
Does anybody use anything different?
I use 8mm microbore hose and use a brass hose connector to connect to the wfp but after around 8 weeks its starts to leak out everywhere even if I take it apart and pack it out with ptfe tape. I purchase these from Inics which is where all of my set up is from but its a real niggle when these start to leak as Ionics charge a fortune for these fittings, any info and places they buy different fittings from would be appreciated
-
Whar typeof fittings mate hozelock type or other
-
If it's the rectus fittings put some protecta balls over them.
Had mine on for the last 6months and no leaks still :)
-
Yeah it is the brass hose lock type but just go through them all the time, I know of other local cleaners complaining about them too, they also buy from ionics for the same fitting
-
hi jamie
is it the connector to the actual hose reel your talking about
Graham
-
Try changing the rubber "o" ring. These wear down quite quick and start to leak. You can buy about 50 of the from eBay, £3 or so.
Have a look at the fitting and you can prob see where the "o" ring has worn and squared off.