Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: Richard Joyce on September 13, 2012, 08:17:05 pm

Title: Floormac brushes
Post by: Richard Joyce on September 13, 2012, 08:17:05 pm

I am getting a floormac of Kev looms which should be delivered soon. What pads are best for it and I need a brush to agitate what one do I need and were can I get these from. ???

Title: Re: Floormac brushes
Post by: Kev Loomes on September 14, 2012, 11:02:39 pm

Richard, see other topic on this already.

You could use pads instead too. For instance we use an XR scrub pad (non absorbant) stitched to a thick bonnet pad. Works brilliant. But the XR pads are no longer available so hence looking to utilise a 'proper' brush attachment.

Title: Re: Floormac brushes
Post by: Warren Aldridge on September 14, 2012, 11:30:27 pm

Just get some standard red scrub pads for a rotary and cut them to size. Think they are just under a fiver each

Title: Re: Floormac brushes
Post by: Kev Loomes on September 14, 2012, 11:43:59 pm

I used to do that Warren! they do have issues though.

Wear quickly
Snag carpet fibres causing pilling
Cheap ones bleed dye everywhere

Good ones can be a stop gap though until something more suitable can be found i.e. good brush or specific scrub pad.

Title: Re: Floormac brushes
Post by: Richard Joyce on September 15, 2012, 10:42:07 pm

Thanks for the replys there is a black brush on the world of clean website for the orick will this work? Also thank you Kev I received the floormac last night I'm going to try it out tomorrow  ;D

Title: Re: Floormac brushes
Post by: AshWhite on September 15, 2012, 11:02:33 pm

Yes Richard, it fits straight on.