Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Avo on September 03, 2012, 08:01:34 pm

Title: Gardiner resi neck help
Post by: Avo on September 03, 2012, 08:01:34 pm

Seem to be having problems with the gardiners quick release resi neck type 1.. Just can't pull it free each time I wanna change over brushes can any one help?? Tried rubbing it down with wet n dry to make it fit easier but still no joy.

Thumbs are killing me from today.  :-\

Title: Re: Gardiner resi neck help
Post by: Dave Willis on September 03, 2012, 08:13:23 pm

I have three or four and they are all different. One is murder tight - just find some really coarse emery or sandpaper to rub it down faster.

Title: Re: Gardiner resi neck help
Post by: Avo on September 03, 2012, 08:20:39 pm

This ones so tight I could leave the clamp undone and it still wouldn't move ha ha... The wet n drys to fine you thinks???

Title: Re: Gardiner resi neck help
Post by: Erithwc on September 03, 2012, 09:03:32 pm

I think the resi neck could do with two internal springs so you could have it loose and it would always return to being straight after tilting the brush.

Paul

Title: Re: Gardiner resi neck help
Post by: Granny on September 04, 2012, 08:17:30 am

Quote from: Erith Window Cleaning on September 03, 2012, 09:03:32 pm

I think the resi neck could do with two internal springs so you could have it loose and it would always return to being straight after tilting the brush.

Paul

That is a good idea thought the same myself also find that it keeps coming loose and I have had to put a washer inside the joint because I couldn't tighten it any further because it has worn so much.
Apart from that great bit of kit.

Title: Re: Gardiner resi neck help
Post by: Alex Gardiner on September 04, 2012, 11:46:35 am

Quote from: Avo on September 03, 2012, 08:20:39 pm

This ones so tight I could leave the clamp undone and it still wouldn't move ha ha... The wet n drys to fine you thinks???

Drop me an email. I am sure that we can send you out a replacement one that is not so stiff.

Title: Re: Gardiner resi neck help
Post by: Avo on September 04, 2012, 11:54:41 am

That's very kind of you Alex thank you!!

Title: Re: Gardiner resi neck help
Post by: David Lingard on September 04, 2012, 03:01:35 pm

I phoned gardiners about this one last week - i bought an aquadapter but couldnt remove the resi-neck from the pole even after i took the clamp completely off. In the end i had to put the pole section in a g-clamp and pull&twist until it eventually threw me across the garden (i exaggerate).

I was told that if you dont use them as a quick release (i.e. leave them on the end) for 6 months they can get really bad. I think mine had fused to the pole it liked it so much ;D

Anyway now i keep a few spares as they are only a few quid, but the main thing is that my neck now screws directly into the aquadapter (with a screw thread) and as i dont change my brush (ever) i have no trouble with it :)

Title: Re: Gardiner resi neck help
Post by: gto on September 04, 2012, 03:24:15 pm

mines brandnew and fixed in solid.
when i first got my slx i though the clamp was for the first section, but after opening the clamp and pulling in didn't budge.
i then realised it was the angle adapter.