Clean It Up

UK General Cleaning Forum => General Cleaning Forum => Topic started by: evil genius on August 14, 2012, 09:36:55 pm

Title: Whirlaway sticking arm.
Post by: evil genius on August 14, 2012, 09:36:55 pm

I've been offered 2 flat surface cleaners at a very reasonable Price, both for
Less than the price of one second hand unit. Both 18", one a whirlaway and the other unbranded. Both cleaners have been sat in a lock up For 12 months and when being used the arm will stop. Jets work fine and when you release the trigger and try again it spins and then stops. Is this damage or just lack of use, would a Strip down and oil cure this?
It's just strange as both cleaners have exactly the same problem.
Thanks.
Ian

Title: Re: Whirlaway sticking arm.
Post by: jmb on August 14, 2012, 09:58:54 pm

be interested in the answer as mine is doin the same thing since hitting the arm on a unflat section of paviers :)

Title: Re: Whirlaway sticking arm.
Post by: Matt Gibson on August 14, 2012, 10:26:55 pm

These the ones off ebay? Just ended yesterday?

Dont know much about them if im honest. does it sound like its hitting something when it stops spinning? Have you tried greasing it with a grease gun?

Title: Re: Whirlaway sticking arm.
Post by: evil genius on August 14, 2012, 11:03:24 pm

yes there the one matt.
i have not bought them yet so have not tryed anything is jsut had the seller on the phone while he was testing them out as its a few hours trip for me and didnt want to waste my time if they are dead. it just seems off there both doing the same and have both been sat unused for the last year. just makes me think  they have tightended up form lack of used and could be striped greased and then rebuilt for very good price.
ian

Title: Re: Whirlaway sticking arm.
Post by: Cliff perkins on August 15, 2012, 09:24:48 am

Sounds like a headache to me ,best leave them

Title: Re: Whirlaway sticking arm.
Post by: Ged on August 15, 2012, 03:48:40 pm

very common problem. turn it over so you can see the rotor arm then fire it up on lowish revs press the trigger and you will see the arm move and then stop so release the trigger. repeating this process you will see the arm gradually move further and further each time untill it starts spinning properly.

Title: Re: Whirlaway sticking arm.
Post by: evil genius on August 15, 2012, 09:37:23 pm

that maybe sounds positive, thanks ged

Title: Re: Whirlaway sticking arm.
Post by: Cliff perkins on August 15, 2012, 09:48:17 pm

Goodluck and great avice

Title: Re: Whirlaway sticking arm.
Post by: evil genius on August 20, 2012, 09:44:05 pm

so i picked up the cleaners on saturday. 1 whirlaway and 1 tech clean.

today i spent a hour with the whilraway. turned upside and soaked in WD40 to loosed everything. then tripped down and greased and put back together. fired up the washer and.................... we have 1 working whirlaway. working as it should and cleaning well. over the moon with the result. will have a bash at the tech clean surface cleaner at the weekend but i think it should be fine also.

all in all its looking like a blooming good bargain  ;D
ian

Title: Re: Whirlaway sticking arm.
Post by: Cliff perkins on August 21, 2012, 07:50:55 pm

If u get the other going and wanna flog it i might have it.