Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: Luc on July 27, 2012, 11:01:19 am

Title: Spm dilution rates?
Post by: Luc on July 27, 2012, 11:01:19 am

Hi guys, what  dilution rate do you guys use when  using a hydro force sprayed? Do you use less then the instruction given. I'm mixing up at 120 MLS per litre

Title: Re: spm dilution rates?
Post by: AshWhite on July 27, 2012, 01:12:41 pm

I dint use hydroforce often, but when I do its 8 scoops - 120mg/litre

Title: Re: spm dilution rates?
Post by: Simon Gerrard on July 27, 2012, 04:46:36 pm

15-20 scoops (Prochem) into a 10 litre HF.

Simon

Title: Re: spm dilution rates?
Post by: Jim_77 on July 28, 2012, 11:42:45 pm

Luc, presuming your hydroforce is 1:8 dilution the logical thing is to use 8x the stated dilution for a pressure sprayer (120ml per litre of water in your hydroforce container).  However because you tend to put a bit more down with a hydroforce you really don't need that all the time.  Mostly I'll use around 80ml per litre but sometimes as much as 150 if it's a minger.