Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Darren H on July 06, 2012, 04:43:26 pm

Title: Getting pole hose out of pole
Post by: Darren H on July 06, 2012, 04:43:26 pm

At the moment i have a 27clx pole with standard angle adapter on the end and the pole hose goes up inside the pole but to get the hose out i have to drill hole in the adapter then when i screw the pole to the adapter it nips agaist the hose and the pole often comes loose because you can not tighten fully because you stop the water flow.
Is there a better way to do this or is there something i could  buy to get round the problem.
Thanks for any advice.   

Title: Re: Getting pole hose out of pole
Post by: Griffus on July 06, 2012, 05:12:21 pm

I have the same pole and adaptor (I think) but no such problem.

Post a picture if possible and I'll compare.

Title: Re: Getting pole hose out of pole
Post by: spudd on July 06, 2012, 05:17:00 pm

Few lengths of electrical tape round the thread should do the trick  :)

Title: Re: Getting pole hose out of pole
Post by: Darren H on July 06, 2012, 06:08:56 pm

(http://www.cleanitup.co.uk/smf/1341594528_POLE 020.JPG)

Title: Re: Getting pole hose out of pole
Post by: thermoclean on July 06, 2012, 09:16:56 pm

Buy a new angle adaptor from gardiners has hole in it.

Title: Re: Getting pole hose out of pole
Post by: Darren H on July 06, 2012, 10:27:46 pm

Ordered a brush from them today and ask them about this im not sure but i think there angle adapters that screw
on which i need on the clx pole. 

Title: Re: Getting pole hose out of pole
Post by: Darren H on July 06, 2012, 10:33:49 pm

(finish of last post)
the screw angle adapters do not have holes in.   

Title: Re: Getting pole hose out of pole
Post by: Alex Gardiner on July 06, 2012, 10:44:22 pm

What you need is a Type2 Resi-neck. This simply screws on and allows the pole hose to exit the adapter through a purpose designed hole.

http://www.gardinerpolesystems.co.uk/acatalog/info%5fRESI%5fNECK%5fTYPE2%5fSTD%2ehtml (http://www.gardinerpolesystems.co.uk/acatalog/info%5fRESI%5fNECK%5fTYPE2%5fSTD%2ehtml)

Title: Re: Getting pole hose out of pole
Post by: Darren H on July 07, 2012, 10:52:58 am

Thankyou alex i have a brush i ordered with you late on friday so will be on phone first thing monday morning to add 1 before its
sent.

Title: Re: Getting pole hose out of pole
Post by: Chris Cottrell on July 08, 2012, 09:05:33 am

Quote from: Darren H on July 07, 2012, 10:52:58 am

Thankyou alex i have a brush i ordered with you late on friday so will be on phone first thing monday morning to add 1 before its
sent.

Knowing how efficient Gardiners are it's probably already been sent  :)