Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: magic moments on July 04, 2012, 07:19:49 pm

Title: ro only getting tds 5 with new resin?
Post by: magic moments on July 04, 2012, 07:19:49 pm

I'm running a 100 gallon john Hewitt ro with booster and little 1 litre Di built in,it won't give me tds 000 only 005 I have just put new resin in,and checked tds before Di is 18 ,what could be wrong?

Title: Re: ro only getting tds 5 with new resin?
Post by: magic moments on July 04, 2012, 07:59:58 pm

Getting desperate would like lower for tommorow,any ideas at all?

Title: Re: ro only getting tds 5 with new resin?
Post by: SB Cleaning on July 04, 2012, 08:29:10 pm

Tds of 5 will be ok to work with.

You may need a bigger di.

Title: Re: ro only getting tds 5 with new resin?
Post by: john stracey on July 04, 2012, 08:47:15 pm

i got the exact same ro just put an 11 litre di on the end of it, have'nt changed my resin since last october and still getting a reading of 3ppm would work with 5 no problem ,

Title: Re: ro only getting tds 5 with new resin?
Post by: magic moments on July 04, 2012, 08:49:07 pm

John where did you get connectors to fit the 11 litre Di?

Title: Re: ro only getting tds 5 with new resin?
Post by: john stracey on July 04, 2012, 09:10:39 pm

local plumbing centre

Title: Re: ro only getting tds 5 with new resin?
Post by: magic moments on July 04, 2012, 09:28:56 pm

Ok so I just disconnect the blue pipe,then unscrew connector and replace with one  so a hose can attach like the mains inlet One?is that all I need?

Title: Re: ro only getting tds 5 with new resin?
Post by: john stracey on July 04, 2012, 09:33:13 pm

sounds good to me ;D

Title: Re: ro only getting tds 5 with new resin?
Post by: George Gardner on July 04, 2012, 10:45:43 pm

Clean with 7?! Oooohhhh poo I'm not joking either. Help