Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Spruce on June 29, 2012, 04:27:14 pm

Title: Push Fit T's
Post by: Spruce on June 29, 2012, 04:27:14 pm
Hi All
Anyone know where I can find an adaptor, preferrably 1/2"  push fit T  (John Guest) with either a 1/4 or 3/8 female thread to screw in a  pressure gauge.

Thanks
Title: Re: Push Fit T's
Post by: gto on June 29, 2012, 04:44:00 pm
ebay, you may need to add an adapter to get down to 1/4 thread
Title: Re: Push Fit T's
Post by: Lee GLS on December 26, 2012, 08:21:39 pm
Spruce did you ever get one of these, I'm currently looking for one.
Title: Re: Push Fit T's
Post by: concept on December 26, 2012, 08:26:45 pm
Equal tees from Gardiners
Title: Re: Push Fit T's
Post by: Spruce on December 26, 2012, 08:44:16 pm
Hi Lee.

I got one of these:

http://www.ebay.co.uk/itm/Brass-3-way-T-Piece-Connector-1-2-BSPT-Male-2-x-1-2-BSPP-Female-/310540389750?_trksid=p2047675.m1850&_trkparms=aid%3D222002%26algo%3DSIC.FIT%26ao%3D1%26asc%3D11%26meid%3D4435643913095711982%26pid%3D100011%26prg%3D1005%26rk%3D1%26sd%3D140763329787%26

The male threaded into the filter housing which is 1/2" NPT and sealed fine with ptfe tape.

The gauge had a 1/4" male side fitting so used a 1/2" BSP to 1/4" brass reducer

http://www.ebay.co.uk/itm/BRASS-BSP-REDUCING-BUSH-FITTING-HEX-NEW-VARIOUS-SIZES-/190582532934?pt=UK_DIY_Materials_Plumbing_MJ&var=490029779732&hash=item2c5f9aab46

Ptfe tape worked fine.


The outlet I used JG 1/2" fittings

http://www.osmotics.co.uk/products/John-Guest-Straight-Adaptor-1%7B47%7D2%22-NPTF-Thread-1%7B47%7D2%22-Tube.html

with

http://www.osmotics.co.uk/products/John-Guest-Tube-to-Hose-Stem-1%7B47%7D2%22-ID-Tube-to-1%7B47%7D2%22-Stem.html

The adapter wouldn't seal in the BSP threads of the T piece, so I mixed up some araldite and glued the threads - no problem now.

I used the stem to hose adapter as I was using 1/2" plastic hose.
Title: Re: Push Fit T's
Post by: R.C Property on December 26, 2012, 08:59:55 pm
guess i have to come to the rescue again for you!!!

you have a choice of 2 here!

http://www.airlinkcompressors.co.uk/products/john-guest-swivel-branch-tee-imperial

http://www.airlinkcompressors.co.uk/products/john-guest-swivel-male-run-tee-imperial

this company is fantastic, i use them for all my fitting and some hose etc,
Title: Re: Push Fit T's
Post by: Spruce on December 26, 2012, 09:18:10 pm
guess i have to come to the rescue again for you!!!

you have a choice of 2 here!

http://www.airlinkcompressors.co.uk/products/john-guest-swivel-branch-tee-imperial

http://www.airlinkcompressors.co.uk/products/john-guest-swivel-male-run-tee-imperial

this company is fantastic, i use them for all my fitting and some hose etc,

 ;D

This was what I wanted to do, but I was using 2 gauges and £50 + including postage was too expensive for me, considering I got pressure gauges for £2.50 each.

http://www.osmotics.co.uk/products/Merlin-Water-Pressure-Gauge.html
Title: Re: Push Fit T's
Post by: R.C Property on December 26, 2012, 09:21:32 pm
guess i have to come to the rescue again for you!!!

you have a choice of 2 here!

http://www.airlinkcompressors.co.uk/products/john-guest-swivel-branch-tee-imperial

http://www.airlinkcompressors.co.uk/products/john-guest-swivel-male-run-tee-imperial

this company is fantastic, i use them for all my fitting and some hose etc,



 ;D

This was what I wanted to do, but I was using 2 gauges and £50 + including postage was too expensive for me, considering I got pressure gauges for £2.50 each.

http://www.osmotics.co.uk/products/Merlin-Water-Pressure-Gauge.html


Tell you what, I'll do u a good deal, I'll let you have the information for free!!! Lol
Title: Re: Push Fit T's
Post by: Spruce on December 26, 2012, 09:32:09 pm
 ;D

I think I'm going to check with you first in future  ;D

Thanks for the link - I see the brass T's I bought are half the price here.

http://www.airlinkcompressors.co.uk/products/tee-bspp-female-x-bspt-male-x-bspp-female

although I haven't checked what the postage charges are
Title: Re: Push Fit T's
Post by: R.C Property on December 26, 2012, 09:41:01 pm
;D

I think I'm going to check with you first in future  ;D

Thanks for the link - I see the brass T's I bought are half the price here.

http://www.airlinkcompressors.co.uk/products/tee-bspp-female-x-bspt-male-x-bspp-female

although I haven't checked what the postage charges are

The prices shown are without vat, so that needs to be added on, but if you spend £5 or more before vat, postage is free, a
Title: Re: Push Fit T's
Post by: Lee GLS on December 26, 2012, 09:57:03 pm
guess i have to come to the rescue again for you!!!

you have a choice of 2 here!

http://www.airlinkcompressors.co.uk/products/john-guest-swivel-branch-tee-imperial

http://www.airlinkcompressors.co.uk/products/john-guest-swivel-male-run-tee-imperial

this company is fantastic, i use them for all my fitting and some hose etc,


i have seen these, but it needs a female thread not a male as the pressure gauge has a male thread, do you have a solution for that  ;D
Title: Re: Push Fit T's
Post by: R.C Property on December 26, 2012, 10:10:09 pm
guess i have to come to the rescue again for you!!!

you have a choice of 2 here!

http://www.airlinkcompressors.co.uk/products/john-guest-swivel-branch-tee-imperial

http://www.airlinkcompressors.co.uk/products/john-guest-swivel-male-run-tee-imperial

this company is fantastic, i use them for all my fitting and some hose etc,


i have seen these, but it needs a female thread not a male as the pressure gauge has a male thread, do you have a solution for that  ;D

Your wish my command!!!
http://www.toolstation.com/shop/Plumbing/Compression/Brass+Socket+12/d20/sd2697/p24305
Title: Re: Push Fit T's
Post by: Lee GLS on December 26, 2012, 10:17:43 pm
guess i have to come to the rescue again for you!!!

you have a choice of 2 here!

http://www.airlinkcompressors.co.uk/products/john-guest-swivel-branch-tee-imperial

http://www.airlinkcompressors.co.uk/products/john-guest-swivel-male-run-tee-imperial

this company is fantastic, i use them for all my fitting and some hose etc,


i have seen these, but it needs a female thread not a male as the pressure gauge has a male thread, do you have a solution for that  ;D

Your wish my command!!!
http://www.toolstation.com/shop/Plumbing/Compression/Brass+Socket+12/d20/sd2697/p24305


lol

nearly there, it need to be 1/2" to 1/4" bsp as the pressure guage is 1/4  ;D
Title: Re: Push Fit T's
Post by: R.C Property on December 26, 2012, 10:37:50 pm
guess i have to come to the rescue again for you!!!

you have a choice of 2 here!

http://www.airlinkcompressors.co.uk/products/john-guest-swivel-branch-tee-imperial

http://www.airlinkcompressors.co.uk/products/john-guest-swivel-male-run-tee-imperial

this company is fantastic, i use them for all my fitting and some hose etc,


i have seen these, but it needs a female thread not a male as the pressure gauge has a male thread, do you have a solution for that  ;D

Your wish my command!!!
http://www.toolstation.com/shop/Plumbing/Compression/Brass+Socket+12/d20/sd2697/p24305


lol

nearly there, it need to be 1/2" to 1/4" bsp as the pressure guage is 1/4  ;D

Do I have to do everything! Lol

http://www.toolstation.com/shop/Plumbing/Compression/Brass+Hexagon+Bush+12+x+14/d20/sd2697/p36312
Title: Re: Push Fit T's
Post by: Lee GLS on December 26, 2012, 10:39:37 pm
guess i have to come to the rescue again for you!!!

you have a choice of 2 here!

http://www.airlinkcompressors.co.uk/products/john-guest-swivel-branch-tee-imperial

http://www.airlinkcompressors.co.uk/products/john-guest-swivel-male-run-tee-imperial

this company is fantastic, i use them for all my fitting and some hose etc,


i have seen these, but it needs a female thread not a male as the pressure gauge has a male thread, do you have a solution for that  ;D

Your wish my command!!!
http://www.toolstation.com/shop/Plumbing/Compression/Brass+Socket+12/d20/sd2697/p24305


lol

nearly there, it need to be 1/2" to 1/4" bsp as the pressure guage is 1/4  ;D

Do I have to do everything! Lol

http://www.toolstation.com/shop/Plumbing/Compression/Brass+Hexagon+Bush+12+x+14/d20/sd2697/p36312

nearly

Female to female  ;D
Title: Re: Push Fit T's
Post by: R.C Property on December 26, 2012, 10:42:39 pm
guess i have to come to the rescue again for you!!!

you have a choice of 2 here!

http://www.airlinkcompressors.co.uk/products/john-guest-swivel-branch-tee-imperial

http://www.airlinkcompressors.co.uk/products/john-guest-swivel-male-run-tee-imperial

this company is fantastic, i use them for all my fitting and some hose etc,


i have seen these, but it needs a female thread not a male as the pressure gauge has a male thread, do you have a solution for that  ;D

Your wish my command!!!
http://www.toolstation.com/shop/Plumbing/Compression/Brass+Socket+12/d20/sd2697/p24305


lol

nearly there, it need to be 1/2" to 1/4" bsp as the pressure guage is 1/4  ;D

Do I have to do everything! Lol

http://www.toolstation.com/shop/Plumbing/Compression/Brass+Hexagon+Bush+12+x+14/d20/sd2697/p36312

nearly

Female to female  ;D

Lol I have just given you the 3 fittings you need lol.

That's all you need, screw the reducer into one end of nipple, the screw the t piece into the other end! Job done!
Title: Re: Push Fit T's
Post by: Lee GLS on December 26, 2012, 10:45:54 pm
arr i get you now  :D, i was thinking of a female to female reducing socket. thanks for your help.

thanks for your post too spruce.
Title: Re: Push Fit T's
Post by: R.C Property on December 26, 2012, 10:51:27 pm
arr i get you now  :D, i was thinking of a female to female reducing socket. thanks for your help.

thanks for your post too spruce.

That's ok, got there in the end! Lol
Title: Re: Push Fit T's
Post by: Spruce on December 27, 2012, 11:49:21 am
 ;D ;D ;D