Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: poole bay on June 23, 2012, 05:38:13 pm

Title: Filter change
Post by: poole bay on June 23, 2012, 05:38:13 pm

hi can any one help please iv bought a 40/40 ro filter new pre filters set it all up tds going in off mains is 350 and coming out of ro at 50 is that a high reading the 40/40 ro can you put them in the wronge way round if so what would happen ? the water is coming out really fast in the holding tank its going in a softner to any help would be great

Title: Re: filter change
Post by: poole bay on June 25, 2012, 05:20:16 pm

no worries found the info on a different site  ;D

Title: Re: filter change
Post by: ben M on June 25, 2012, 05:23:28 pm

Quote from: poole bay on June 25, 2012, 05:20:16 pm

no worries found the info on a different site  ;D

so tell us please, can be useful to others  ;)

Title: Re: filter change
Post by: Spruce on June 25, 2012, 09:48:45 pm

really don't understand what he was asking about in the first place.

Changing the prefilters won't change the output TDS once they have been properly flushed. Do this before coupling up the R/O.

Title: Re: filter change
Post by: Carl@Cwc on June 25, 2012, 10:15:35 pm

easy mistake to make though,
not disconnecting the filters before the RO to give them a thorough flush.

been there and done it.

i change the filters and di resin and put RO on a couple hour flush when tds rises.
its like starting afresh then..

these tips and tricks are only down to this forum though.
learning/reading tediously