Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Erithwc on June 14, 2012, 09:00:00 pm
-
pulled up at a job the other day and noticed a slight leak so i took the hose insulation off and the plastic elbow snapped :-[ so i want to replace all the hose connectors hose ect from the tank to the hose reel what best for this ??? ??? ???
Plus the clear hose that i got from purefreedom was white on the inside why has this happened i have always used pure water with my system is it making the plastic brittle ??? ???
Thanks Paul
-
Have you tried this sort of hose?
(http://i4.imlive.com/imagesrv/imp_getimage?qu=77&mark=1&cctrl=max-age%3D2592000&is=imlfoh&wm=174x144&fn=12i127372/inbox@127372O1112991381.jpg)
-
You need a brass elbow on your hose reel mate you can get one from www.purefreedom.co.uk . as for other connectors i just use cheap plastic ones from local hardware shop never had any bother with them . Mike
-
I got some of Gav the other day, there the best I've sean!
Called vito or nitro from Gardiners I think
-
If you are going to use rectus remember to use the series 19 not the 21.THE 21 HAS A LOT OF BREAKS