Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Dave Willis on May 21, 2012, 09:13:00 pm
-
(http://www.cleanitup.co.uk/smf/1337631143_window_cleaning_RO_400.jpg)
Particularly the 600gpd version?
-
Yes
I am
Rob ;D
-
should have
went to specsavers got a 4040
-
Ian
Superb RO!!!!
Rob ;D
-
Ian
Superb RO!!!!
Rob ;D
not saying it isnt Rob, looks a good bit of kit ;) just to many things to go wrong, it is like supped up nova with a ferrari engine or is that the other way round
-
Ian
You've met me - I like simple - nothing complicated there ;)
Rob ;D
-
Ian
You've met me - I like simple - nothing complicated there ;)
Rob ;D
just surprised me you went for that over a simple 4040 Rob thats all mate. hope your well ;)
-
just out of interest what ro is it ? have you got a link ?
-
I've got a 4040 in the back of the unit and only needed to get a new membrane but it looked like a nice compact set up that if I wanted to I could throw in the van and fill up on site. Mines got a bit more frame around it than that.
I don't do any window cleaning now but I needed to clean the windows at home and thought I would fill up my tanks a couple of weekends ago.
24 hrs just less than 3000 litres and a 001 reading with no DI
I am well mate, busy, in Torquay tonight, just cleaned the store roof at Nicholson Road, bit of work going on in Darlington tomorrow and then over to Kenton on Monday!!!
Mine is from Cleaning Spot and it is a pumped 600gpd unit, approx £400.00, can't remember!!!
Are you busy Ian?
Rob ;D
-
I've got a 4040 in the back of the unit and only needed to get a new membrane but it looked like a nice compact set up that if I wanted to I could throw in the van and fill up on site. Mines got a bit more frame around it than that.
I don't do any window cleaning now but I needed to clean the windows at home and thought I would fill up my tanks a couple of weekends ago.
24 hrs just less than 3000 litres and a 001 reading with no DI
I am well mate, busy, in Torquay tonight, just cleaned the store roof at Nicholson Road, bit of work going on in Darlington tomorrow and then over to Kenton on Monday!!!
Mine is from Cleaning Spot and it is a pumped 600gpd unit, approx £400.00, can't remember!!!
Are you busy Ian?
Rob ;D
I am flat out most days, be it window cleaning or online stuff. all is good here though had a reality check a couple of months ago that kicked my in the ass and heart and made me think long and hard, bouncing forward now with vengance :)
-
So it works well then? Twin booster pumps for each membrane seems simple enough.
-
Picture is the reach2wash version. I think vyair do the same but I can't see it on their website.
-
Picture is the reach2wash version. I think vyair do the same but I can't see it on their website.
what ever it is it is imported, could I ask out of interest why you want this over a 4040 Mark Etting ?
-
Mark
Sorry for the hijack - it was Ians fault!!!!!!!! :D
Mine has to be run on a 24 hr timer and needs to be off after every hour for half an hour - to stop the pump overheating!!!
I didn't like it at first but now I'm ok with it.
Good product rate and I end up with a very low TDS reading. I have never used a DI unit and have always gotten low readings anyway - that part is not specific to this unit.
I like it !!!!!
Rob ;D
-
Thanks, pretty much answered my questions.
Why not a 4040? No particular reason. Just that I've managed for five years with a 300gpd system without any worries. Running the booster pump for hours at a time.
So just weighing up the options and the cost of initial purchase and maintenance costs.
-
http://www.johnhewitt.com/ro.htm
Even cheaper.
-
Thanks, pretty much answered my questions.
Why not a 4040? No particular reason. Just that I've managed for five years with a 300gpd system without any worries. Running the booster pump for hours at a time.
So just weighing up the options and the cost of initial purchase and maintenance costs.
what are you maintenace costs right now with what you have ?
I'm not trying to sell you on a 4040 I just interested to know ;)
-
I have 300 gpd same make load off garbage as soon as i have some spare cash im changing it. I only get about 600 litres out off new resin before tds starts rising again and i dont mean from 000 to 001 i mean its jumps to 008 or higher woudnt recomend it to anyone as far as im aware its cheap stuff from china >:( >:( >:(
-
Thanks, pretty much answered my questions.
Why not a 4040? No particular reason. Just that I've managed for five years with a 300gpd system without any worries. Running the booster pump for hours at a time.
So just weighing up the options and the cost of initial purchase and maintenance costs.
what are you maintenace costs right now with what you have ?
I'm not trying to sell you on a 4040 I just interested to know ;)
set of membranes every couple of years £100
filters every six months £30?
Initial cost less than £200
Good 4040 would cost me around £700 with vat
Booster pump if needed £250?
£86 for carbon replacement filter
Not sure how much a membrane replacement would be.
Big difference just to make water.
-
mark you wont need a booster pump really,mine runs on 55psi with a low pressure membrain,5/6hrs for 1000lts.
pre-fliters are the same on your system so a £10 for two,
new membarin did cost me £220 ther are cheaper but i brought a oringal filter and no copy
i have a booster and have yet to use it,had no need,and we use 500/650 ltrs aday
-
I've got the Vyair 400gpd version,.. the pumps on my one can run 24/7, and it has handy features like auto flush and pressure switches that stop the pump when the incoming water stops, or when the tank is full & the float valve closes. 10/10 for me,.. cheap as chips, good performance & cheap to maintain.
-
Thanks Nat, a sensible reply ;)