Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Window Washers on May 09, 2012, 07:19:00 pm
-
I need to tape up a clx 27ft pole to stop the ends coming out,.
the tape has long gone.
Does anyone know the distance from the end of the pole sections to where to tape should go?
-
I need to tape up a clx 27ft pole to stop the ends coming out,.
the tape has long gone.
Does anyone know the distance from the end of the pole sections to where to tape should go?
about 6 inches.
-
I believ Mr Gardiner recommends 13-15cm.
-
I need to tape up a clx 27ft pole to stop the ends coming out,.
the tape has long gone.
Does anyone know the distance from the end of the pole sections to where to tape should go?
130mm from the base of the section to the bottom edge of the tape.
Here is a link to a complete video guide to replacing the Joint-stop tape on a telescopic pole:
http://youtu.be/KtXwzxNetNE
-
Roughly 6inches, but the marks will be there from the first tapes...
-
Roughly 6inches, but the marks will be there from the first tapes...
That'll be about 150mm then. ;D ;D
-
cheers guys,
-
alex that tape on your video looks better & different from the stuff i've been using which is b&q stuff has it a name or something
-
bump
-
alex that tape on your video looks better & different from the stuff i've been using which is b&q stuff has it a name or something
I would imagine that it is much the same as the B&Q stuff - it is PVC electrical tape. We do sell it on our website if you want to buy the actual stuff.
-
cheers alex