Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: Craigp on May 07, 2012, 07:53:55 pm

Title: TM pump oil leak
Post by: Craigp on May 07, 2012, 07:53:55 pm

I have oil seeping from somewhere on my high pressure pump, I thinks it's coming from the end opposite to the crank, it's a metal plate about 2" diameter with a black plastic middle, I tightened the 3 allen bolts but they was already pretty tight.

Anyone know what it is? it does not look like it has a gasket.

Would removing it and using gasket sealant work?

Cheers Craig

Title: Re: TM pump oil leak
Post by: John Kelly on May 07, 2012, 10:19:58 pm

It will be just a blanking plate as the drive shaft can be converted to either side. It should have a gasket or O ring to seal it.

Title: Re: TM pump oil leak
Post by: Craigp on May 07, 2012, 11:07:01 pm

Ok thanks John.

Il call dual pumps see if they got a gasket/o ring for it.