Clean It Up
UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: peter maybury on May 06, 2012, 09:50:21 am
-
I had a problem last year with the pistons in the pump breaking. Last time I had to buy a new pump head but as it was bank holiday and could not get any parts or replacement, have stripped the pump completely. Does anybody have any of the castings that go around the cam that drive the piston or complete pistons to get me out of a problem Can anybody tell me why they break like this both occasions two of the castings have broken. Any body that is in the know with replacement oil seals for these pump please point me in the right direction.
Thanks
Peter
www.carpetcleanercardiff.com (http://www.carpetcleanercardiff.com)
-
its a long shot but i have a interpump W140 with the same problem , you can have it for spares..... but i doubt you have the same pump.
what pump is it? I tried to get mine fixed but was told it was not cost effective
-
difficult to identify pump properly as is italian manufacture for hydromaster type lws3525 hydrapump 2. But looking at it I would say the same pistons etc as I had in my spitfire 4.0. I think that these pumps are all similar as are used on other machines.
If you are happy to send the pump to me if it in no good I will return or see if I have any way of repairing for you or will return. I will reimburse the postage or whatever etc if your are happy to do that.
Peter
www.carpetcleanercardiff.com (http://www.carpetcleanercardiff.com)
-
Easier for me to just take a photo and post it here, I'll do it when I get home
-
there are only so many manufacturers of pumps commonly used in T/m most are Cat Comet/General & Interpump your pump will be one of these but H/M USA conceal the name so you can't buy direct at a reduced price.
do you use the TMF forum? you could post a picture of your pump and someone would know its make
this is my pump.... any use?
(http://www.cleanitup.co.uk/smf/1336311940_pump 001.JPG)
-
I think its the same as got on our phoenix
Try dual pumps - Im sure they carry spares for this type of pump
also try David Ingram - he is also a sourse of good information on this type of pump
Hope this helps
Terry
-
A pressure washer place in bridgend will sort you out went there yesterday a v good set up canget u details
-
Easy to get here on ebay
http://www.ebay.co.uk/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=interpump+W140&_sacat=See-All-Categories
-
(http://www.cleanitup.co.uk/smf/1336403572_Piston 1.JPG)
(http://www.cleanitup.co.uk/smf/1336385311_Pump 1.JPG[img]http://www.cleanitup.co.uk/smf/1336385340_Pump 2.JPG)
The first photo is the broken piston with the cam. the other photos are of the complete pump. I would imagine that a lot of these pistons are the same if made by the same manufacturer.
Mike, if you don't mind sending the pump/pump head to me I would gladly re-imburse you the carriage.
If anyone else is able to help in any way it would be much appreciated.
Thanks
Peter
-
email me your address and i'll post it tomorrow.
info@henryhalliday.co.uk
-
I'll help you Pete,
Buy a new one you tight welsh git!!!!!!!!!!!!!!!!!!!!!!!!!
You can have that tip for nothing
;D ;D ;D
-
I hope that you are going on the weekend Billy, I could do with getting rid of some aggression!
Peter
www.carpetcleanercardiff.com] (http://[url)
-
Don't worry ole boy!!! i'll be there!!! Don't forget your glasses grandad, you might learn something!!! :o ;D ;D ;D
-
Peter just take it over to HMs guys in Oxford those guys are pump specialists couldn't be more than hour from you. Roger the mechanics a great guy, probably cost a couple of hundred but better than down time.
mark
-
I apprechiate the help but up untill now am still unable to identify pump or manufacturer. I will take your suggestion and give the guys in oxford a ring. I would also like the details of the people in Bridgend please.
Peter
www.carpetcleanercardiff.com (http://www.carpetcleanercardiff.com)
-
It will most probably be a Comet pump. Oil seals are a POP to change and all.
-
Don't say that Glynn, I paid something like £500 for HM to change mine last time :'(
It also occurred to me I could have bought a new pump for that - lesson learned.
Yes today I found out mine is a comet pump thats on a HM spitfire 4.0
-
yes sounds like a comet pump and yes very easy to change
-
have found out it is a comet pump lws 3525. Anybody know of any uk suppliers for seals, parts and complete pumps?. Have sourced lots in u.s. but unable to find any in uk.
thanks for the info.
Peter.
-
Peter, Manchester pressure washers can get parts, I think they have to order them in though.
(LWS 3525 same as mine)
http://www.manchesterpressurewashers.co.uk/default.aspx?page=109
-
Superjet bridgend 01656 725200 brynmenyn ind est