Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: pncleaning on April 25, 2012, 01:16:23 pm
-
Hi guys
I have a TDS reading of 267!!! so think I would need a ro system? if I add window cleaning to my services. Could someone also explain to me please how I would go about setting this up.
Thankyou in advance
Paul
-
Hi Paul,
It would depend on how big of a window cleaning operation you have.
I am just small fry compared to some of the guys on here and just use a backpack. I purify my water at home with RO/DI into 3 x 200 Litre drums, then transfer into smaller 25 Litre drums for my car.
The RO I got from http://www.johnhewitt.com/wc.htm (http://www.johnhewitt.com/wc.htm)
Basically I just run a hose from your outside tap to the RO unit, send the pure to the 200 Litre drums and waste to drain.
John Hewitt will help you if you need advice.
Hope that helps a little,
Gaz
-
Hi Gaz
I am looking to add window cleaning to my business and am looking for advice before I take the leap. Would you advise ro and di? or just ro?
Thanks again mate
Paul
-
to use both ro and di - would i run a hose from my tap through the ro device then through the di vessel and then into my tank?
I know I am hardwork ;D
Thankyou
Paul
-
to use both ro and di - would i run a hose from my tap through the ro device then through the di vessel and then into my tank?
I know I am hardwork ;D
Thankyou
Paul
you system would be as follows
tap |pre filters|ro | di | tank |
twin di's will save you on resin use long term
-
Tds that high mate you defo need an RO and DI - the RO won't get your Tds all the way to 000 on its own