Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Moderator David@stives on January 07, 2006, 07:08:00 pm
-
Can anyone tell me what flow rate you would get through 100m of microbore from gardiner through a 100psi shureflo pump as compared to 100m of standard guage.
(Alex could you have a hose 100m and reel ready for collection tommorrow)
-
I tested my 100mtr microbore from gardiner with a 60 psi flowjet pump and the flow rate out of the hose only was 1.7ltrs a min.
For comparision My 1/2" hose with a 60psi flowjet pumped out 6 ltrs a min.
Nel.
-
Sure can David,
Give Kirsty an email on kirstygardiner@hotmail.com and she will get it ready for you.
Alex
-
Flow rate with a 100psi pump is quite a bit more than 60psi, I would say about 50% more. (must measure it sometime!)
ALex
-
Iv`e never botherd about flowrate,as long as theres a good jet out of the brush and enough water is going on the glass im happy,too much would obviously be a waste,Gaz
-
Gaz, do you have pics of your trolley yet
simb0
ps where's the best place to get backpacks from, as i am sure you know
-
Gaz, do you have pics of your trolley yet
simb0
ps where's the best place to get backpacks from, as i am sure you know
I`ll take some pics this week and post them on here
as for the backpacks i don`t use one but you can try
www.williamsonpumps.com
www.cleantech.co.uk
www.skypolesystems.com
and theres one on ebay just tipe in shurflo backpack,they are from america a few on here have had them from there i think it was the cheapest way,Gaz ;)