Clean It Up
UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: garybristow on February 29, 2012, 03:46:47 pm
-
i do tile and grouting and general hard floors as an add on to carpets etc
went to do a quote for lady for tile and grouting,when i got there it was wall tiling she wants done
with the floors i normally spray the grouting with a viper chemical from alltec,brush in with a grout brush,then go over the floor with a rotary with a scrubbing brush.
im presuming im gonna have to brush by hand with same chemicals,anyone got a better idea?
gary
-
Phosphoric based cleaner. Here's a tip, try mixing it with a foaming upholstery shampoo so it clings better and doesn't all run off ;)
If you've got a minitex they work quite well with the scrubbing brush attachments (I'd use the softer one, not with the silly bristles round the outside either.
Otherwise just a normal hand brush, or if the joints are thick enough get a grout brush up it.
Just rinse off with plain water using a cloth/sponge! Problem will be if you can't let water run down the wall so hope it's all in the shower cubicle or over the bath... or it's a wet room! Can be done over other floors but carefully!
-
thanks jim ,where do i get this minitex thing??
gary
-
It's a Texatherm unit Gary
-
I wouldn't buy it specifically for the job but it's a very versatile machine... one that you'd find lots of uses for like agitating or even a full LM clean of upholstery... bonneting stairs, scrubbing hard floors in confined spaces/steps etc
Just don't lean on it too hard like I did and break it!
-
Buy Bonaclean Gel from Bonasystems.
Smear it on with an applicator and leave for 15 mins.
Quick scrub with a wooden deck brush then hose off.