Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: p1w1 on February 27, 2012, 09:44:14 am

Title: Help with di vessel
Post by: p1w1 on February 27, 2012, 09:44:14 am

just got a new di vessel as old one was not re usable on my system..i need to change the fittings as so i can use john guest fittings for the inlet and outlet on the vessel the thread size is 3/4 inch bsp and gardiners only seem to go up to 1/4 inch this is the type of fitting i'm after http://www.gardinerpolesystems.co.uk/acatalog/1_4_.html (second one in) does anyone know where i can get these fittings..
thanks

Title: Re: Help with di vessel
Post by: Ian Lancaster on February 27, 2012, 01:25:51 pm

http://www.osmotics.co.uk/categories/Fittings-and-Tubing/John-Guest-Fittings/1%5C4%22-Tubing-Fittings/

One of these should do the trick, if you need other sizes go to their home page and choose 'John Guest hose and fittings' and whatever imperial size you need.

Whoops! sorry. Jumped the gun there, should have looked on the Gardiners link first!!  Never mind, if you search the Osmotics site you will find what you need.  If not, fit plastic 3/4" barrel nipples to the cylinder first, then the tap adapters will fit.

Title: Re: Help with di vessel
Post by: p1w1 on February 27, 2012, 02:22:13 pm

Quote from: Ian Lancaster on February 27, 2012, 01:25:51 pm

http://www.osmotics.co.uk/categories/Fittings-and-Tubing/John-Guest-Fittings/1%5C4%22-Tubing-Fittings/

One of these should do the trick, if you need other sizes go to their home page and choose 'John Guest hose and fittings' and whatever imperial size you need.

Whoops! sorry. Jumped the gun there, should have looked on the Gardiners link first!!  Never mind, if you search the Osmotics site you will find what you need.  If not, fit plastic 3/4" barrel nipples to the cylinder first, then the tap adapters will fit.

thank you