Clean It Up
UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: JandS on February 20, 2012, 07:07:36 pm
-
Best place to get service kit/head replacement kit, are they the same thing?
Ashbys say it's the PC5955 400psi.
But I think it's the 500psi one as I've had it up to that.
John
-
Is it the Pumptec 205 head?
If so, I think Ashbys is around £39 + plus Vat and del for the piston and seal kit.
This will fit any 205 head regardless of the psi. I think the psi depends on the motor that drives the pump
and also the control valve....perhaps.
If running in a Ninja, it will be 400 psi max or the airflex would be 600 psi max.
I'v found over the years that just the piston and seal kit needs replacing. I have never found the valves need replacing
so usually just the piston and seal kit will suffice.
Probably also advisable to replace the offset drive bearing @£19 if machine has done 6 to 12 months work.
-
Cheers for that carpet guy nearly sure it is the 205.
Was going to get the bearing as well.
John