Clean It Up

UK General Cleaning Forum => General Cleaning Forum => Topic started by: A Foster on February 12, 2012, 12:14:36 am

Title: Vacuum recovery filter
Post by: A Foster on February 12, 2012, 12:14:36 am

Is there an off the shelf system for this or any info on how to make one?

I'm trying to work out where to get or how to make a system that vacuums water directly from the rotary surface cleaner while pressure washing then directs the water either directly down a drain or passes through a holding tank that would trap the sand and sludge, then pump out the cleaner water.

This would allow constant cleaning and rinsing at the same time without having to empty the wet vac or rinse driveway after, trying to direct all the dirt to a nearby mains drain.

Any info?

Title: Re: Vacuum recovery filter
Post by: BDCS on February 12, 2012, 07:23:00 am

http://www.tech-clean.co.uk/industrial_vacuum_recovery_systems.htm

Title: Re: Vacuum recovery filter
Post by: mike roberts on February 12, 2012, 10:57:20 am

Numatic produce a vac which will do everything  ;D
By mains drain assume you mean on the sewer system

Title: Re: Vacuum recovery filter
Post by: A Foster on February 12, 2012, 07:12:49 pm

Thats the kiddie - Techlean.

yes I mean mains sewer system. Is it ok to drain into them or is special licenses needed?

Title: Re: Vacuum recovery filter
Post by: mike roberts on February 15, 2012, 06:26:56 pm

Quote from: A Foster on February 12, 2012, 07:12:49 pm

Thats the kiddie - Techlean.

yes I mean mains sewer system. Is it ok to drain into them or is special licenses needed?

Just saw one advertised on flea bay ... maybe worth an offer ?