Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: GB Window Cleaning on February 10, 2012, 12:02:37 pm
-
so ivew been avoiding doing anymore gutter and facsia clean because its so much hard work and ypu get drenched >:(
but laterley ive been thinking about canvassing for some more of this type of work as i reson there is decent money to be had in it
so my question is what is the best brush to use for this type of work? cos at the moment i put a vikan (breeze block ;D) sill bush on my slx-30 and its just too bloody heavy. by the way my everyday window brush is a superlight extreme, standard.
i was looking at those new gardiners cill brush and thinking that could be my answer?
any advice/comments welcome as usual!
thanks for reading
george
-
i recon this baby looks just the ticket? 8) anyone use these for this type of cleaning?
http://www.gardinerpolesystems.co.uk/acatalog/info_BRUSH_SLSILL_FTSTIFF.html
-
;D ive just read the description and it says ..."Also suitable for gutter, soffit and conservatory roof cleaning"
so theres my answer but i would still like to hear first hand opinions from you all please!
-
then again i might go for the medium bristles cos i recon the stiff might scratch plastic and polycarbonate conservatory roofs
as has been talked about on hear before!
:-\
p.s this is just like being out shining... im talking to myself all day! ;D seriously though, im getting bad for having nearly full blown conversations with myself at work ;D
-
GB I have the same set up as you.
I use a superlite for everyday window cleaning, and a vikan sill brush for connies, fascias etc. I agree with you that the vikan is a pig to use compared to a superlite.
I have been having the same thoughts and am just about to buy the gardiners superlite sill (the one for connies etc) so if it is any assurance someone else is thinking the same as you!
I will be buying the medium bristles.
Cheers, Mike
-
hi mike
great mate! why the medium bristles by the way? as opposed to the stiff? becuase of scratching plasic with the stiff?
thank for the reply mate
george
-
I have both vikan stiff and vikan medium bristled brushes and actually find the medium more effective.
Cheers, Mike
-
I use the medium extreme for gutters/fascias,
1: its light
2: because it has a small head stock, i find it gets in all the nooks 'n' crannies
Better than even the superlite
-
I have both vikan stiff and vikan medium bristled brushes and actually find the medium more effective.
Cheers, Mike
yeah i can see what your saying there, flocked bristles do cover the surface area better
tar mate
-
I use the medium extreme for gutters/fascias,
1: its light
2: because it has a small head stock, i find it gets in all the nooks 'n' crannies
Better than even the superlite
just the extreme medium? as in not the new sill brushes? do you use the extreme medium for conny roofs to?
thanks
-
Yep, just the extreme.
Didnt like the sill brush.
If a con roof is only a bit grubby, i use the extreme.
If its reasonably dirty, i use a s/lite mono,
If its mingin', i use a modified superlite, with the outer, longer bristles, cut down so the're level with the inner bristles for a really hard scrub.
Ive used the last brush to remove ingrained lichen.
Also, all these are cleaned using hot water & no pretreatment
-
Yep, just the extreme.
Didnt like the sill brush.
If a con roof is only a bit grubby, i use the extreme.
If its reasonably dirty, i use a s/lite mono,
If its mingin', i use a modified superlite, with the outer, longer bristles, cut down so the're level with the inner bristles for a really hard scrub.
Ive used the last brush to remove ingrained lichen.
Also, all these are cleaned using hot water & no pretreatment
thanks alot steve, this sounds like good advice! i still recon im gonna get a gadiners sill brush though and i recon while im buying i'll try one of those new scapper attactments and one of resi swivel things!
i like your idea about the modified brush cutting down the longer outer bristles! i might give that go too
thanks again
george