Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Ryan @ Transparent, Carlisle on February 03, 2012, 09:08:17 pm
-
just a couple of leaks to sort out - extra PTFE tape, and a female endstop for 2nd hose reel :D
made some wooden brackets to hold brushes, poles, A-frames, onto the roofs, just need more pipe insulation to wrap round it and it's good to go.
(http://i258.photobucket.com/albums/hh261/rabbithunter_/2012-02-03173630.jpg)
-
im estimating that with this 2man setup, that my round can be completed in 3 to 3.5 (weather depending) weeks out of 4
-
You might want to put your shurflo pump the right way up though ! ;D ;D
Rich
-
the one on the left?
When i first got wfp, that was the way i had it installed in the van, by the person who i bought it off, who apparently knew what he was doing, but also installed the D.I before the pump... so it went tank - DI - pump
excuse my ignorance, but does it make a major difference if its the wrong way round?
cheers
-
The story goes that if the diaphram in the pump leaks then water will damage the important end of the pump , i have never heard of this happening , but who knows , and to add to that , i have got 2 streamboxes , the pumps are on their sides !
So ignore me , i am but a fool with a lager in hand ;D
Rich
-
well, i shall turn it the other way up, when i get a minute ;D
i am but a fool with a cider in hand
-
Had my Shurflo arse upwards for years. Never had any problems :D
-
Must be an old wives tale then ;D
Im now sat here with a lager in one hand and a cider in the other my luvvverr ;D ;D ;D
Rich
-
Is that a Brodex hose reel on the left?
-
Not sure where the big black reel is from. I bought it 2nd hand from a guy, along woth shurflo pump n controller, di vessel and unger pole