Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: ben M on February 01, 2012, 04:08:16 pm
-
I have a Streamline Digital pump Controller show P5 ???
What does at mean please? I can't use my pump now :(
-
Sounds like the pressure setting needs increasing. Cold weather slows it all down
-
you mean the flow?
-
No, pressure
-
how to do that please?
-
I don't have one, I can tell you how to set the Varistream one. Best wait for a while and see if someone comes on who has a Streamline version.
-
pressure at the max (99) and still not working >:(
-
The controller is telling you that the Pump Pressure switch has activated - The pressure has built up in access of 100PSI
In this case it is not the controller that has stopped the pump it is the pump pressure switch itself
If PS is displayed, this means that the pump's pressure switch has been operated due to a high build up of pressure in your system. The controller is set to work with a 5.2 litre per minute pump up to 100psi, although it will work at higher ranges. Common causes for the pressure switch operating are:
1. A restriction to the water flow, i.e. from a twisted hose.
2. Blocked or small water jets. (We recommended that the jets are no smaller than 2mm).
3. Grit or dirt trapped in the system.
4. Air trapped in the system.
5. Prolonged shut off of the water flow.
6. New or misaligned fittings can also cause a pressure build up
Work from the brush back along the system to the pump and ensure there are no restrictions any where.
Hope this helps
Ian
-
Thank you very much Ian for your reply but i've done everything and still not working!
-
I have a Streamline Digital pump Controller show P5 ???
What does at mean please? I can't use my pump now :(
Another though occurs - The temperature is very low today in some cases below freezing, the cold air and cold ground will have an impact on Two things
1) The wall of the hose will be much stiffer and not expand as much
This will have an impact on the pressure in the system it may be that you need to alter the calibration on the controller to take this into account.
2) Cold water flows more slowly again impacting on pressure - to over come what appears to be low flow EG the water is moving more slowly in the cold Have you increased the flow rate? Effectively the pump will have to work harder to achieve the same flow rates.
May sound daft but check for any ice build up from the jets back along the hose.
-
I have a Streamline Digital pump Controller show P5 ???
What does at mean please? I can't use my pump now :(
Another though occurs - The temperature is very low today in some cases below freezing, the cold air and cold ground will have an impact on Two things
1) The wall of the hose will be much stiffer and not expand as much
This will have an impact on the pressure in the system it may be that you need to alter the calibration on the controller to take this into account.
2) Cold water flows more slowly again impacting on pressure - to over come what appears to be low flow EG the water is moving more slowly in the cold Have you increased the flow rate? Effectively the pump will have to work harder to achieve the same flow rates.
May sound daft but check for any ice build up from the jets back along the hose.
I have done all that.....any other suggestions?
-
Ok having checked for any restrictions and ice. the next step would be to check the pump itself
The easy way is if you have a spare pump connect it and see if the same thing happens. Also check the electrical connections.
The cold may also be having an effect
-
Ok i will do that.
Thank you very much Ian for your help, you are a star! ;)
-
No problem let me know how it goes.
-
Ok having checked for any restrictions and ice. the next step would be to check the pump itself
The easy way is if you have a spare pump connect it and see if the same thing happens. Also check the electrical connections.
The cold may also be having an effect
Hi,
Been to varitech and it was the digital controller,they replaced it and now it's fine! thanks again for your help, just glad it's fixed. :)
ben
-
That is good news I know how frustrating it cab glad it is sorted.