Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: ben M on January 31, 2012, 06:29:48 pm

Title: Please help Alex Gardiner
Post by: ben M on January 31, 2012, 06:29:48 pm
 Last week I bought a slx 25 with The Super-Lite® Radius-Sill Brush Flat-Trim Medium Bristles and a gooseneck standard 10''.

This week i bought The Super-Lite® Radius-Sill Brush Flat-Trim Stiff Bristles , option brush fitting plastic 90* and a Resi-Neck™ Quick-Release Type 1.
How can i connect my pole hose with my new brush? Did i miss something?

Thank you.

Ben
Title: Re: Please help Alex Gardiner
Post by: londoncleaners on January 31, 2012, 06:33:24 pm
So what's with all the copy and pasting geeee ;D ;D
Title: Re: Please help Alex Gardiner
Post by: ben M on January 31, 2012, 06:35:54 pm
because i am a lazy sod  ;D ;D ;D
Title: Re: Please help Alex Gardiner
Post by: ♠Winp®oClean♠ on January 31, 2012, 06:42:49 pm
The pole hose goes up & right through the tube of the resi neck. Look & you'll se a hole in the top. ;)
Title: Re: Please help Alex Gardiner
Post by: Window Washers on January 31, 2012, 06:44:17 pm
Quote from: ♠Winp®oClean♠ on January 31, 2012, 06:42:49 pm
The pole hose goes up & right through the tube of the resi neck. Look & you'll se a hole in the top. ;)
or read the instruction manual  ;)

Title: Re: Please help Alex Gardiner
Post by: Alex Gardiner on January 31, 2012, 08:14:59 pm
Quote from: ben M on January 31, 2012, 06:29:48 pm
Last week I bought a slx 25 with The Super-Lite® Radius-Sill Brush Flat-Trim Medium Bristles and a gooseneck standard 10''.

This week i bought The Super-Lite® Radius-Sill Brush Flat-Trim Stiff Bristles , option brush fitting plastic 90* and a Resi-Neck™ Quick-Release Type 1.
How can i connect my pole hose with my new brush? Did i miss something?

Thank you.

Ben


What I do is take a short length (about 25cm) of pole hose and fit it to the brush and then feed it through the hole in the Resi-Neck (as posted above). Then attach a John Guest 8mm straight connector to the bottom of the length of hose. When you need to switch gooseneck and brush assemblies simply release the gooseneck, disconnect the John Guest and switch over.
Title: Re: Please help Alex Gardiner
Post by: ben M on January 31, 2012, 08:41:59 pm
It's what i thought! Going to order the missing part now  :)

Thanks for your help, speedy response as always. ;)

Ben
Title: Re: Please help Alex Gardiner
Post by: stuart mc on January 31, 2012, 08:50:36 pm
Re: Please help Alex Gardiner



all along and alex didn't need any help, he knew how to do it already ;D
Title: Re: Please help Alex Gardiner
Post by: ben M on January 31, 2012, 08:53:02 pm
very true  ;D

I should have said: Please help Me Alex Gardiner  ;)
Title: Re: Please help Alex Gardiner
Post by: Window Washers on January 31, 2012, 09:07:51 pm
Quote from: Alex Gardiner on January 31, 2012, 08:14:59 pm
Quote from: ben M on January 31, 2012, 06:29:48 pm
Last week I bought a slx 25 with The Super-Lite® Radius-Sill Brush Flat-Trim Medium Bristles and a gooseneck standard 10''.

This week i bought The Super-Lite® Radius-Sill Brush Flat-Trim Stiff Bristles , option brush fitting plastic 90* and a Resi-Neck™ Quick-Release Type 1.
How can i connect my pole hose with my new brush? Did i miss something?

Thank you.

Ben


What I do is take a short length (about 25cm) of pole hose and fit it to the brush and then feed it through the hole in the Resi-Neck (as posted above). Then attach a John Guest 8mm straight connector to the bottom of the length of hose. When you need to switch gooseneck and brush assemblies simply release the gooseneck, disconnect the John Guest and switch over.
I new there was a method to your madness, I did look at this myself and wondered why, then straight away thought Alex would have put that there for a reason.   ;)

I just learnt something new today, awesome stuff  ;D
Title: Re: Please help Alex Gardiner
Post by: s.w.c on January 31, 2012, 09:31:09 pm
its not rocket science ???
Title: Re: Please help Alex Gardiner
Post by: Window Washers on January 31, 2012, 11:20:55 pm
Quote from: s.w.c on January 31, 2012, 09:31:09 pm
its not rocket science ???
i'm not a rocket  ;D