Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Richard iSparkle on January 30, 2012, 08:37:14 pm

Title: Glue for gardiner stop end
Post by: Richard iSparkle on January 30, 2012, 08:37:14 pm

What glue should i use to glue on the rubber stop end to my SLX?

Title: Re: Glue for gardiner stop end
Post by: Alex Gardiner on January 30, 2012, 08:43:06 pm

Quote from: richard speech on January 30, 2012, 08:37:14 pm

What glue should i use to glue on the rubber stop end to my SLX?

Superglue works well.  Apply a thin bead to the inside of the rubber end cap about 2 cm down, slide the first cm of the end cap onto the pole (with all of the extended sections slightly extended to prevent excess glue getting on the base of the sections), sharply tap the end cap on the ground to quickly ram it into position.  This needs to be done quickly as the Superglue will set in about 2 seconds.

Title: Re: Glue for gardiner stop end
Post by: Richard iSparkle on January 30, 2012, 08:45:03 pm

Quote from: Alex Gardiner on January 30, 2012, 08:43:06 pm

Quote from: richard speech on January 30, 2012, 08:37:14 pm

What glue should i use to glue on the rubber stop end to my SLX?

Superglue works well.  Apply a thin bead to the inside of the rubber end cap about 2 cm down, slide the first cm of the end cap onto the pole (with all of the extended sections slightly extended to prevent excess glue getting on the base of the sections), sharply tap the end cap on the ground to quickly ram it into position.  This needs to be done quickly as the Superglue will set in about 2 seconds.

thanks alex.  thanks for the superfast response  :)

Title: Re: Glue for gardiner stop end
Post by: bobplum on January 30, 2012, 10:20:31 pm

would araldite be better