Clean It Up
UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: davep on January 08, 2012, 08:11:42 pm
-
What inline filter do you use if you hav a tm? Is the hydrofilter any good?
-
You CAN use the hydro-filter on a porty. I use one when I'm using the auto-dump on the Jag and it's spot on... :)
-
Lint Hog for me http://www.mytee.com/products/product.php?id=F200
-
Lint hog for me too... use it on my Jag and it really saves me time not having to clean out all the crud out of my extraction tank after each job
-
The poor design of the Jag/scorpion waste tank has a lot to do with the need for an inline ... :)
-
John I can't wait for the new range of portables you've designed. Honestly, you talk such a good game... put me on the waiting list please. I'll PM you my credit card details now, you can take the full amount of money because I'm so confident from your forum posts you are going to wipe the floor with all the existing competition.... 2 years from now the whole carpet cleaning industry worldwide will be using John Martin portables!
(http://www.truckmounters.com/yabbfiles/Templates/Forum/default/rolleyes.gif) (http://www.truckmounters.com/yabbfiles/Templates/Forum/default/rolleyes.gif) (http://www.truckmounters.com/yabbfiles/Templates/Forum/default/rolleyes.gif) (http://www.truckmounters.com/yabbfiles/Templates/Forum/default/rolleyes.gif) (http://www.truckmounters.com/yabbfiles/Templates/Forum/default/rolleyes.gif)
To answer the original question...
Depends what you mean by "any good" Dave! Does it filter all the solid debris out of the recovered solution? Of course, very well in fact. However after a couple of hundred square feet of wool carpet you'll start wondering where all your airflow has gone. On a decent sized domestic job you might have to stop and empty it twice during the job. Major pain in the ass.
Not so bad on polyprop/nylon obviously, except if you're doing a job where they have never vacuumed. Obviously with any filter the more fluff/debris you pick up the worse your airflow gets... but this effect seems a lot greater with the inline type filters compared to the basket in the TM waste tank
The "sock" part is a bit of a git to clean except for if you give it a good blast with a pressure gun. I know some guys buy cheap stockings and just chuck them away but I think that's a bit expensive, pointless and not very eco friendly!! Plus the denier of stockings is a lot finer than the filter mesh so it must hammer the airflow.
I bought one soon after I got my TM. I persevered with it for a while but went back to using the strainer basket in the tank. Sometimes just don't even bother with the basket, just means jetting the crud out of the bottom of the tank at the end of the day.
-
The poor design of the Jag/scorpion waste tank has a lot to do with the need for an inline ... :)
Utter crap.
Out of all the machines I have used, the Jag is the easiest to clean out....
Simply take the bung off and the 2 'U' bend float chambers off the top of the stack pipes and you can get right in there with an open ended hose...
The inside of the tank is designed in such a way that fluff and debris is directed to the bottom of the tank which avoids the filters becoming blocked.
I think you should just buy a Jag, John. You'll not get a better machine, fact....
-
Sounds like a lot of fannying about.
I just open the drain valve on the Ninja
and Bob's your uncle.
Short length from pump outlet and use
any excess cleaning solution to swill out.
John
-
Sounds like a lot of fannying about.
I just open the drain valve on the Ninja
and Bob's your uncle.
Short length from pump outlet and use
any excess cleaning solution to swill out.
John
It's really not to be honest.
I am a bit OCD admittedly, when it comes to keeping my machine clean.... ;D
-
John I can't wait for the new range of portables you've designed. Honestly, you talk such a good game... put me on the waiting list please. I'll PM you my credit card details now, you can take the full amount of money because I'm so confident from your forum posts you are going to wipe the floor with all the existing competition.... 2 years from now the whole carpet cleaning industry worldwide will be using John Martin portables!
(http://www.truckmounters.com/yabbfiles/Templates/Forum/default/rolleyes.gif) (http://www.truckmounters.com/yabbfiles/Templates/Forum/default/rolleyes.gif) (http://www.truckmounters.com/yabbfiles/Templates/Forum/default/rolleyes.gif) (http://www.truckmounters.com/yabbfiles/Templates/Forum/default/rolleyes.gif) (http://www.truckmounters.com/yabbfiles/Templates/Forum/default/rolleyes.gif)
To answer the original question...
Depends what you mean by "any good" Dave! Does it filter all the solid debris out of the recovered solution? Of course, very well in fact. However after a couple of hundred square feet of wool carpet you'll start wondering where all your airflow has gone. On a decent sized domestic job you might have to stop and empty it twice during the job. Major pain in the ass.
Not so bad on polyprop/nylon obviously, except if you're doing a job where they have never vacuumed. Obviously with any filter the more fluff/debris you pick up the worse your airflow gets... but this effect seems a lot greater with the inline type filters compared to the basket in the TM waste tank
The "sock" part is a bit of a git to clean except for if you give it a good blast with a pressure gun. I know some guys buy cheap stockings and just chuck them away but I think that's a bit expensive, pointless and not very eco friendly!! Plus the denier of stockings is a lot finer than the filter mesh so it must hammer the airflow.
I bought one soon after I got my TM. I persevered with it for a while but went back to using the strainer basket in the tank. Sometimes just don't even bother with the basket, just means jetting the crud out of the bottom of the tank at the end of the day.
I am using Hydro filters and got much impressed with the answer that Jim Neal has given to you. Now this is what I can call, absolutely spot on.
-
I clean the waste tank after every job.
John
-
I only asked if the filter is any good! :P
-
I clean the waste tank after every job.
John
So do I, and I wipe properly too..... :P
-
I only asked if the filter is any good! :P
Yes, it is....
-
Dave persevered with mine for a year major pain in the arse restricts airflow badly. Been filter-less for a year with no problems.
Cant for the life of me see the point of putting a filter on a Scorpion as you need all the airflow you can get on a porty however good.
-
Dave persevered with mine for a year major pain in the arse restricts airflow badly. Been filter-less for a year with no problems.
Cant for the life of me see the point of putting a filter on a Scorpion as you need all the airflow you can get on a porty however good.
The reason I use one with the Jag, is so that when I'm using auto-dump, debris doesn't foul the filter :)
-
The poor design of the Jag/scorpion waste tank has a lot to do with the need for an inline ... :)
Utter crap.
Out of all the machines I have used, the Jag is the easiest to clean out....
Simply take the bung off and the 2 'U' bend float chambers off the top of the stack pipes and you can get right in there with an open ended hose...
The inside of the tank is designed in such a way that fluff and debris is directed to the bottom of the tank which avoids the filters becoming blocked.
I think you should just buy a Jag, John. You'll not get a better machine, fact....
:) Surely you guys don't fall that old spiel that the tank is designed intentionally not to fully empty when the waste gate is open ..
Its clearly a design flaw , an oversight , and the side bung is a band aid solution to the issue .
For anyone not familiar , the jag/scorp waste gate sits an inch above the tank floor , thus leaving an inch of rancid waste , fluff in the bottom after emptying .
Compare this to well designed waste tank , where the machine will rake a few degrees towards the gate side and the tank floor has a small recess before the gate so as the gate sits below the floor level , all you should ever have to do is open the gate and occasionally rince quickly with the solution hose and a small hosetail .
also in the jag :) those turned down stacks with floats below as a level cutoff dont work ...
and the downturned stacks are prone to sucking in foam at a lower level
its a poor solution compared to running the stacks straight up to near the lid top and using an electronic float switch for cutoff .
Actually now that i read the cleantalk posts :) i see that john bolton ( isnt he a technical adviser ?) has removed the downturned stacks from his own machine and has no cutoff ... as an improvement !
-
If you have a truckmount it is a good idea to have a filter basket made I had one made by hydramaster and also bought an extra flter basket. On large jobs we are able to change the filter without losing any downtime on the machine and just jet it out the dirty filter whist the machine continues working.
I did have an inline filter and it was a pain in the butt, I do however do volume areas of wool carpets so was loosing a lot of air flow in a short space of time.
I did try filterless for a few weeks but again this did not work for me as I was getting a lot of blockages when emptying. The basket box has been a sensible investment for me and well worth the outlay. As a busy person that needs to be productive anything that save me time is money well spent. In addition to saving time the stess that is put onto the truckmount engine by restricting the airflow can be costly.
Peter
www.carpetcleanercardiff.com (http://www.carpetcleanercardiff.com)
-
I only asked if the filter is any good!
Yes, it is....
No, it isn't....
:)
-
The poor design of the Jag/scorpion waste tank has a lot to do with the need for an inline ... :)
Utter crap.
Out of all the machines I have used, the Jag is the easiest to clean out....
Simply take the bung off and the 2 'U' bend float chambers off the top of the stack pipes and you can get right in there with an open ended hose...
The inside of the tank is designed in such a way that fluff and debris is directed to the bottom of the tank which avoids the filters becoming blocked.
I think you should just buy a Jag, John. You'll not get a better machine, fact....
:) Surely you guys don't fall that old spiel that the tank is designed intentionally not to fully empty when the waste gate is open ..
Its clearly a design flaw , an oversight , and the side bung is a band aid solution to the issue .
For anyone not familiar , the jag/scorp waste gate sits an inch above the tank floor , thus leaving an inch of rancid waste , fluff in the bottom after emptying .
Compare this to well designed waste tank , where the machine will rake a few degrees towards the gate side and the tank floor has a small recess before the gate so as the gate sits below the floor level , all you should ever have to do is open the gate and occasionally rince quickly with the solution hose and a small hosetail .
also in the jag :) those turned down stacks with floats below as a level cutoff dont work ...
and the downturned stacks are prone to sucking in foam at a lower level
its a poor solution compared to running the stacks straight up to near the lid top and using an electronic float switch for cutoff .
Actually now that i read the cleantalk posts :) i see that john bolton ( isnt he a technical adviser ?) has removed the downturned stacks from his own machine and has no cutoff ... as an improvement !
Compared to the problems I have found with other machines, either from experience or from listening to feedback from other users, I see the flaws you give the Jaguar can be easily over-come. You have almost endorsed the Jag yourself.... ;)
I know for example, the design flaws of certain other machines will ensure that the operator better have plenty of spare lolly, for spare motors.... :-X
I will say this, those that have Jags/Scorps, tend to stick with them. That in itself speaks volumes... :)
-
I only asked if the filter is any good!
Yes, it is....
No, it isn't....
:)
Oh alright then... No it isn't..... :D
-
;D
I think for some purposes yes, but others no. Dave runs a TM so I'd not recommend it, it'll probably end up in the back of the shed with all those other expensive things that seemed like a good idea at the time.
-
I almost had him there... he could have bought mine..... ;D
-
John... What name do you use on the other channel ???
-
Tried one found it hard work. Strainer basket works just fine as per what Jim said :-)
Cheers Tony
-
John... What name do you use on the other channel ???
just a guest .. but i can see :)
-
I can't find ANYWHERE to buy these filters in the uk, any suggestions???? grassy ass :)
-
this one ? im sure there are others
http://www.ebay.co.uk/sch/i.html?_from=R40&_trksid=p5197.m570.l1313&_nkw=lint+hog&_sacat=See-All-Categories
-
i just got a box filter for my tm from hydramaster great bit of kit
-
I got one off ebay recentley. Got fed up keep breaking the hydroforce ones. Its a huge great stainless steel one which woodbridge sell for £399 + vat. I got it for £250 all in. So much better!!
-
Richard do you know the actual diameter of the hydro filter cuffs?
-
John... What name do you use on the other channel ???
just a guest .. but i can see :)
John - what ya hiding??
For someone with such vast opinions on other peoples products & businesses, it would be nice if you had the balls to properly let people know who you are
-
John... What name do you use on the other channel ???
just a guest .. but i can see :)
John - what ya hiding??
For someone with such vast opinions on other peoples products & businesses, it would be nice if you had the balls to properly let people know who you are
please..please,,,, tell me I'm not the only one who sees the irony of that post :D :D
-
lol
hello Mike!!!!
how you doing???
still finding time to be a mod on here then hey??!!! thought you would be too busy for that like the rest of us ;D
you know me & my opinion - if someone wants to come on a forum and slate someone or something, then they should atleast identify themselves, or do you like keyboard terrorists on your forum?
i suppose it keeps the numbers up
less quality more quantity eh
-
what you on about ??? ???
I was amused that you who post as 'new look clean' tells someone using their name 'John martin' to have........ "the balls to properly let people know who you are".......... or is john martin an alias ?
you post as though we know each other but if we do pardon my crap memory but who are you? at least remind me of your name :)
-
;D
-
It is such a shame that such good advice can be obsured by such issues as this. The forum should be able to identify who is joining it!!!!!!!!!!!!!! I have better things to do than read bo--ocks. I do not have a lot of time to spend on the forum and would rather spend that time constructivly.
Having a machine running at optimum is important whether it is a portable or a truckmount. Depending on the type of work you do you can save a lot of time and expense in finding what works for you.
Peter
www.carpetcleanercardiff.com (http://www.carpetcleanercardiff.com)