Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: magic moments on December 21, 2011, 12:15:37 pm
-
im about to start in the new year and am planning my water fed pole setup
im going down the diy setup ,and believe it would be easier for me to purify the water in my garage and transfer to the van when required ,can you please explain your setups to me to help me in my planning ?
-
If you do a search on the forum you will find plenty of useful information to get you on your way.
Spruce
-
theres lots of different R/O units available how much water do you want to make per day? what is your tds from the tap? are you on a water meter?
-
the readings are high where i am ,i will have a 350 litre tank in the van and prob a 1000 litre in the garage for water storage doesnt have to be full ,i always want water ready .
-
You would be better off phoning someone like Gardiner Pole Systems (www.gardinerpolesystems.co.uk) or Pure Freedom (www.purefreedom.co.uk)... Explain to them exactly what it is you need to do and they will tell you exactly what you need.
Andy ;)
-
I used purefredom for my DIY setup then split it and put the ro in the shed and pump and tank in the van.
Good on you mate starting in the winter,it is tough but if you can cope with the winter you'll be sorted the rest of the year. I started last December that was cold but I'm upto 134 custys now.... So go for it mate.
Daz
-
im about to start in the new year and am planning my water fed pole setup
im going down the diy setup ,and believe it would be easier for me to purify the water in my garage and transfer to the van when required ,can you please explain your setups to me to help me in my planning ?
first thing to do is find out your tds are you in a soft water area or hard water. then you will know if its d.i. only or ro needed.
-
You would be better off phoning someone like Gardiner Pole Systems (www.gardinerpolesystems.co.uk) or Pure Freedom (www.purefreedom.co.uk)... Explain to them exactly what it is you need to do and they will tell you exactly what you need.
Andy ;)
thats what the forums for asking questions & getting help.
do you phone them every time you have a problem.
-
youl need a 4040 ro
or a merlin (not if yr on a metre)
then turn on n make pure
transfer it to yr van
off u go simples ;D ;D ;D ;D
-
you dont want a merlin if youve got a high tds, it will eat your resin
-
a merlin will eat ya resin :o :o :o
r u mad ????
a merlin will bring yr tds reading rite down
and make u use less resin