Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Lee GLS on December 09, 2011, 08:10:24 pm
-
How cold does the outside temperature have to be before everything in the van freezes up? Supposed to be -3 tonight, might have to put the heater on
-
lee google propex heatsource 2000
works off a thermostat
which u set
simples ;D ;D
might cost you 400 ish but b the
best 4 ton u ever spend ;) ;)
-
good question lee, im experimenting with this at the moment and because my ro is van mounted (and my di for that matter) i get my oil rad on when the temps get to + 2 0c or lower! when about everyone else? hopw this helps mate
george
-
I've mounted my r/o to a trolley so it can be bought in.
also i have undone the pipes to the pump so there is no water in there to freeze.
Tank i cant really do to much with but it is boxed in the only thing at risk is the di vessel
Does anyone know if it will cause damage if the resin freezes?
i have opened the screw at the top of the vessel so if it freezes it wont crack the vessel but will it damage the resin?
-
I've mounted my r/o to a trolley so it can be bought in.
also i have undone the pipes to the pump so there is no water in there to freeze.
Tank i cant really do to much with but it is boxed in the only thing at risk is the di vessel
Does anyone know if it will cause damage if the resin freezes?
i have opened the screw at the top of the vessel so if it freezes it wont crack the vessel but will it damage the resin?
ro mounted on trolley is a very good idea!
-
Got down to minus 5 the other day here and everything fine, i wouldn't go any colder than that without using a rad though :-\