Clean It Up
UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: Wayne Boardman on November 20, 2011, 08:45:16 pm
-
Did a job on Saturday and thought i'd try out a new chemical.
I'd bought some pure clean to do upholstery and rugs.. Turned up did the chair with pure clean (That came up good). Then had some left over in the sprayer and thought i'll give it a go on the carpet. (I was going to powerburst it).
Method - Just sprayed, very light agitate with brush - left 10mins and extracted with hot water
Must admit it came up way better than I thought.
Does anyone else use pure clean and if so do you get similar results (Or was it just luck !)
Also - I have tried Mpower and thought it was ok - got mixed results and wondering if pureclean is prochems equivalent? (Is it a micro splitter?)
I'll attached some pics (See what you guy's reckon) (Before ones attached first)
-
After Pics
-
Nice job Wayne.
I use PureClean on a daily basis and it rarely lets me down.
-
I used to use Pure Clean a lot but have found SPM to be better.
Simon
-
Hi
What did you rinse with
Oliver
-
Oliver,
Rinsed with just hot mater in the tank. (With a Splash of deodoriser).
Simon - I was going to give SPM a go.. So if you recomend I may give it a go after the tub of pure clean is gone
-
Wayne, I'm with Simon on this, SPM really is worth ago!!
regards
Billy
-
SPM for me too, getting some great results.
However i havnt used Pureclean so cant compare.
Andrew.
-
Wayne, nice job and pics look great, just one question though.
Do you always take your commode with you on yer jobs ;D
-
Nice job, i do rate Pureclean but prefer Powerburst it never fails to amaze me.
Mark
-
Paul - :D
Saw that as soon as I walked in...Made me wonder what the actual stains were !
-
I use pureclean a lot and really can't complain about the results.
Can't say I used spm to compare...who produces/sells it?
-
Neil,
Solution in Cornwall.
I was a big fan of Pure Clean and can't knock the stuff but having tried SPM I think it works even better.
Simon
-
I use pureclean a lot and really can't complain about the results.
Can't say I used spm to compare...who produces/sells it?
Neil you buy it from the same place you bought your Scorpion ;)
-
Does anyone know if they SPM in smaller tubs?
Pure clean is £26.00 4kg and SPM £80 for 15kg (So price is about the same in terms of weight etc)
-
Just get some Wayne, it won't get left sitting barely used in the back of your shed like a lot of other "wonder" chemicals ;)
-
Don't forget Chemspec DFC - we use that on around 90% of our work with great results.
-
never tried SPM but will order some when ordering some more m-power. how would peopel say it compares to the other products they sell, in particular m-power and solution HD?
-
Don't forget Chemspec DFC - we use that on around 90% of our work with great results.
[ do you use 105 as both a pre spray and tank solution...or do use 210 as pre spray..ive used 105 as both just wondered if you use 210 and what the results were..
-
Pics look great, So Pure Clean just needs rinsing with water and not acid rinsing and is it safe on all carpets i only use dry fusion at the mo but want to start using extraction aswell also it says rinse and residue free so can this be left in the carpet and not extracted i.e when bonneting????
Cheers Phil.
-
so can this be left in the carpet and not extracted i.e when bonneting????
Yes it can.
-
I use it as a spotter. Mix double or triple strength in 1l bottle.
Solves 95% of stains.
I mix it in a 1 litre pump up, with a jet stream flow instead of a dispersed flow, with good pressure it pretty much removes the stain on contact, I dont even use a brush.
-
gna give it a go cheers guys.