Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Total shine cleaning services on November 16, 2011, 11:22:39 am
-
Hi guys
Just plumbed my fog wash in and have messed about with settings for a while and got hot water now.
Only problem I have is when I turn the water off at the pole it takes my shurflo pump about 30-40 seconds to back pressure then stop but the fogwash don't like this and over pressurises and blows the water out hozelock plastic connector off causing damage to it-any ideas- my only thought is to keep pole on window to window and speed up
Graham-total shine mk
-
try the cal on the pump, r u using a flow control
-
Get rid of your hose lock connectors on the hot out of the heater and use a washing machine hose.
Roy
-
Thanks lads I have adjusted the Allen bolt on top of the pump after some advice from Peter and the team and have fitted a brass connector to the water out-the washing machine hose could be an idea
-
Roy do you connect the washing machine hose straight to you hose reel? only i tried that and the hose just knotted up when the hose reel was going round,
jay
-
hi Jay the washing machine hose is just the same as you would connect the normal hose so shouldnt tangle !!!
-
The red hose is what i tried is that the right one?
-
I could not get on with the washing machine hose but got 1/2" radiator hose from the local car spares place.
Works fine.
Izac.
-
cool cheers for that Izac . Is it the red washing machine hose or the waste hose thats being used