Clean It Up
UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: craignozza on November 08, 2011, 08:11:17 pm
-
Hi guys ive got a powerflite portable now it has a hole underneath with foam inside it ( hav'nt got a clue what its for ) anyway i had pump running but as soon as i switch vacs on water starts poring out from it can anybody shed some light on this cheers craig
-
I have a powerflite but i cant think of any hole on it that has foam in it! whereabouts is this hole?
Also, you have opened it up and checked all the pipes are still connected to the pump and the heater as these can "pop off" if they have become loose.
Tony
-
its directly underneath the machine :)
-
dont know the power flight first hand but would think you have either sucked up and over filled the waste tank and its in the motors, just run motors till it stops then run for about 5/10 mins to dry out OR something has come loose water pipe probably
-
mark hadn't overfilled recvovery tank as just emptied it also checked pipes and all still attached :)
-
is it a removable recovery tank? remove it and run motors if not run motors I think some has got in motors
-
If water is coming out of the vac exhaust, it is because there is water in the vac impellar housing. If it has been sucked in from the waste tank, it will be dirty water coming out.
As the vacs inlet hose is attached to the waste tank, that's the only way water can get inside it.
When I was a porty user my last machines safety waste water full level, cut out, stopped working and waste water would often blow through the vac exhaust onto a strategically placed drip mat.
Dave.
-
When you say directly under the machine, do you mean
centrally or to the side in front of the rear wheels.