Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Small but perfectley formed on November 08, 2011, 02:45:01 pm

Title: Fogwash Problem
Post by: Small but perfectley formed on November 08, 2011, 02:45:01 pm

Can anyone suggest whats wrong when i connect to hose reel with microbore it cuts out disconnect it starts.

Title: Re: Fogwash Problem
Post by: Dave Willis on November 08, 2011, 03:46:51 pm

Won't fire unless water is flowing through it and at the right flow rate.

Title: Re: Fogwash Problem
Post by: Small but perfectley formed on November 08, 2011, 05:27:13 pm

Water is flowing through it heats water then connect to hose reel which has microbore it cuts out.

Title: Re: Fogwash Problem
Post by: WinTech on November 08, 2011, 05:32:00 pm

Have you got enough of a flow rate. Not enough and you will find it cuts out.

Title: Re: Fogwash Problem
Post by: Dave Willis on November 08, 2011, 05:37:36 pm

Connect hosereel and pole hose, open the pole valve and watch the heater. If no clicking can be heard then alter the flow setting a little on the heater dial. When it fires up mark the setting on the casing for future reference.

Title: Re: Fogwash Problem
Post by: AS Window Cleaning on November 09, 2011, 08:12:16 am

did this fix it?! I'm interested to see as this would mean you might have to have higher flow rate, and therefore more water, to use hot water system as this.