Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: Bob Robertson on November 13, 2005, 07:58:46 pm

Title: sebo rollers
Post by: Bob Robertson on November 13, 2005, 07:58:46 pm: Hi

What is the best way to clean the sebo rollers on the duo?

regards

tihson
Title: Re: sebo rollers
Post by: John_Flynn on November 13, 2005, 09:37:15 pm: Do I read here that somebodyelse has wasted their money??
Title: Re: sebo rollers
Post by: Steve Weatherley on November 13, 2005, 09:45:04 pm: Hi John

I take it you don't approve of the Duo?

Regards

Steve
Title: Re: sebo rollers
Post by: John_Flynn on November 13, 2005, 09:53:51 pm: Have you not not read my comments on many previous threads??

Give me an 18" carpet brush anytime, if I had bought one I would probably say it is the Bees Knees, but I used one for a month F.O.C and arrived at my unbiased opinion.
Title: Re: sebo rollers
Post by: Steve Weatherley on November 13, 2005, 10:12:13 pm: No wonder you have got a bad back :o :o
Title: Re: sebo rollers
Post by: John_Flynn on November 13, 2005, 10:50:43 pm: If only Steve IF ONLY !!!
Title: Re: sebo rollers
Post by: garyj on November 13, 2005, 11:09:42 pm: Isn't this the sort of thing you should be told when you buy the thing!!! ::) If not, thats very poor service, when I bought my Rotowash I was told exactly how to clean and maintain it.
Title: Re: sebo rollers
Post by: Karl Wildey on November 14, 2005, 09:27:55 am: switch sebo on and use fork set at an angle to remove fluff from rollers.

Used a brush for 10 years and switched to a sebo, so much nbetter, now switched to a host, even better. Sorry John but you are on our own here.
Title: Re: sebo rollers
Post by: nick.solution on November 14, 2005, 10:14:13 am: Hi

Undo the 4 small screws on the base off the unit and remove the 2 slide outs, on the side, the brushes can then be removed, then use a dog grooming comb to clean the brushes, re-insert and replace the screws,

The brushes can be cleaned without removal, we normally clean at the end of each job.
Sorry to hear you didn't like it John, looks likew you are in the minority though.

Have you sold the beast yet, someone will get a bargain if they buy it, from what Barry knuckley told me the temperature is better than most mainline production TM's

Best regards Nick
Title: Re: sebo rollers
Post by: John_Flynn on November 14, 2005, 01:45:49 pm: Sorry about my comments for the SEBO Nick but as you know I speak my mind!!

As regards to the T/M it is true what Barry Knuckley tell you about it, I have had a good number of enquities about it and people saying that they want it, but to date only one person has been to see it and it was not what they were looking for.

This setup is a true Bargain, so come on lads there much be someone genuine out there who wants a Bargain.
Title: Re: sebo rollers
Post by: cleaning co on November 14, 2005, 02:02:41 pm: john thought u sold it couple weeks ago ?
Title: Re: sebo rollers
Post by: John_Flynn on November 14, 2005, 02:17:18 pm: Did, but the buyer still not come up with payment so it is still with me, I am still working and getting busy but it is really causing me pain, so I guess it is still on the market.