Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: DaveG on October 19, 2011, 04:49:26 pm
-
Hi guys..
Our Merlin in producing water (before resin) at 50-60 ppm. Its pumped through at 70psi.
Now the thing is, we were running it at tap pressure (about 25psi) for a week or so, while we found the right pump, could we have damaged the membranes or should we persevere in the hope that tds comes down?
Cheers
-
mine is always at 38 with 50psi. thought was the norm. maybe mine is sh agged too
-
I thought they get the tds down to around 20 ???
-
send it me up il tell ya ;D ;D
-
Just re-checked and the tds coming out of the Merlin is now 71.....
Just out of interest, checked tds on waste and its 651!!!!! Even tho tap tds is 370!
Baffled ??? ???
-
stick it in the post
gud lad or parcel force wiv that
scooter ov yrs ;D ;D ;D
-
bump ;D
-
Just changed my merlin membranes as tds was 81, now its 20 at 70 psi, mine were about 3 years old.
-
Ethan, whats your tap tds?
Cheers
-
Just re-checked and the tds coming out of the Merlin is now 71.....
Just out of interest, checked tds on waste and its 651!!!!! Even tho tap tds is 370!
Baffled ??? ???
if your tap water is 370...then a tds of 50-70 is quite normal for a small RO like merlin isnt it?
my subby has one....his tap is around 200...he gets 20-30 out the merlin i think