Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: Bedfordshire Oven Cleaning on October 14, 2011, 07:26:36 pm

Title: Advice on Sebo Dart please
Post by: Bedfordshire Oven Cleaning on October 14, 2011, 07:26:36 pm

Hi,
My Sebo dart 2, the orange hazard light is on for most of the time now, I have checked every concievable pipe, hole, filter..... All fine but the light is flickering but nearly constant.
Any ideas?

Cheers
Paul

Title: Re: Advice on Sebo Dart please
Post by: Len Gribble on October 14, 2011, 07:46:24 pm

Think it’s some thing to do with the brush contact to the flooring (could be a micro switch)

Title: Re: Advice on Sebo Dart please
Post by: Bedfordshire Oven Cleaning on October 14, 2011, 07:53:08 pm

Have checked the belt, is fine. The only thing I can find is if you roll the brush manually it rocks back and forth about quarter turn before any resistance is felt...
You are right though Len, if you run it on low profile on a setting for say pile depth of 3 it lights up to tell you the brush is not in contact with carpet. But no matter what height setting I use the same?

Title: Re: Advice on Sebo Dart please
Post by: Paul Redden Countryfresh on October 14, 2011, 09:26:53 pm

have you checked the extension hose end is fully pushed home?