Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: Peter Sweeney on October 05, 2011, 07:01:51 pm

Title: Steamway 9100 Technical Spec
Post by: Peter Sweeney on October 05, 2011, 07:01:51 pm

Does anyone have a copy of this or know where I can get one? My mechanic wants it to do a major service on my machine. The manufacturers don't have one because they no longer make them  :o

Cheers
Pete

Title: Re: Steamway 9100 Technical Spec
Post by: from edge2edge on October 05, 2011, 07:10:26 pm

Pete i have a manual well at least Roger at mpms witney(hydramaster oxford) has it coz i aint technical so he keeps it but if you bell him i am sure he could copy it or send it to you to borrow for a while...........Regards Alan(swindon)

Title: Re: Steamway 9100 Technical Spec
Post by: Peter Sweeney on October 05, 2011, 07:12:17 pm

what for that machine?

Title: Re: Steamway 9100 Technical Spec
Post by: from edge2edge on October 05, 2011, 08:04:14 pm

Pete mine is the steamway 9100lx which Roger services 22hp 47 blower(technical stuff)........Alan

Title: Re: Steamway 9100 Technical Spec
Post by: Paul Moss on October 05, 2011, 08:44:22 pm

Pete just call Dave Ing

Title: Re: Steamway 9100 Technical Spec
Post by: Peter Sweeney on October 05, 2011, 09:09:41 pm

Thanks Alan, your'e a star.

Good Advice Paul but my mechanic is quite looking forward to it. He's an ex JCB engineer so has a good all round techy/engineering brain and has kept me going when ever anything has gone wrong so far. He's local and very reasonably priced so it makes sense to stick with him. Also looking at builder a burner into machine too.

Pete

Title: Re: Steamway 9100 Technical Spec
Post by: Paul Moss on October 05, 2011, 09:13:55 pm

Pete makes sence. Good to see your still going strong.
 Best Paul

Title: Re: Steamway 9100 Technical Spec
Post by: Peter Sweeney on October 05, 2011, 09:44:56 pm

don't know about strong but you have to keep going eh.

hope you are well.

Pete

Title: Re: Steamway 9100 Technical Spec
Post by: john rees on October 05, 2011, 11:35:30 pm

I have one if you need me to copy it for you.
                             john

Title: Re: Steamway 9100 Technical Spec
Post by: John Kelly on October 06, 2011, 08:07:58 am

The engine, blower and pump specs will all be available seperately on the net. This will have the lubes etc on.

Title: Re: Steamway 9100 Technical Spec
Post by: Peter Sweeney on October 06, 2011, 01:51:20 pm

Hi John

Thanks but have arranged for Alans copy to be sent to me. Appreciate the offer though. Thanks alot Alan.

Pete

Title: Re: Steamway 9100 Technical Spec
Post by: from edge2edge on October 11, 2011, 10:46:52 am

Hi Pete can you email the correct coolant to put in the steamway from the manual as i have just checked and i am quite low so need to top up before thie cold spell kicks in................Alan

Title: Re: Steamway 9100 Technical Spec
Post by: Peter Sweeney on October 11, 2011, 09:56:21 pm

Hi alan

Sure, have got it and will read properly thursday (as will my engineer) so will send it over. thanks again.

Pete

Title: Re: Steamway 9100 Technical Spec
Post by: fybertec on October 11, 2011, 11:15:57 pm

It is 50/50 water and anti freeze if i remember correctly.

jamie