Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: sunshine windies on September 28, 2011, 08:36:10 pm

Title: DI problems
Post by: sunshine windies on September 28, 2011, 08:36:10 pm

I changed the resin yeterday and the TDS was 000 for one tank now up to 005.........the DI tank is only filling to half way , think i might be doing something wrong, anyone know of a video or something showing how to do it please

Title: Re: DI problems
Post by: richard jagger on September 28, 2011, 09:03:07 pm

How are you buying your resin in small quantities.or larger 25 litre bags?
And how large is your D I Tank.

Title: Re: DI problems
Post by: sunshine windies on September 28, 2011, 09:06:10 pm

1 or 5 litre bags mate.........i'm convinced its not the resin though i don't think i'm refilling it properly i need to watch a video or read an explanation of how to do it

Title: Re: DI problems
Post by: Pope vader on September 28, 2011, 09:07:54 pm

its aint hard,  how many litres of resin did you put in

Title: Re: DI problems
Post by: sunshine windies on September 28, 2011, 09:10:04 pm

700ml filled right to the top , i read something about you should fill it 2/3rds of the way and fill to the top with water , does that mean tap water?

Title: Re: DI problems
Post by: Pope vader on September 28, 2011, 09:13:48 pm

there ur problem 700ml aint going to last, u need 5 + litres

Title: Re: DI problems
Post by: Pope vader on September 28, 2011, 09:15:04 pm

what you are using as di vessel is a ro part i think,  it just isnt big enough to work,  what is the tds of you water

Title: Re: DI problems
Post by: sunshine windies on September 28, 2011, 09:20:45 pm

http://www.purefreedom.co.uk/10-complete-di-resin-filter-unit-p-437.html

this 200 GPD RO unit with the 10' di unit which has a refillable 700ml cartridge which i refilled yesterday and was 000 had about 300 litres of pure water now showing 005

Title: Re: DI problems
Post by: richard jagger on September 29, 2011, 12:11:01 am

Get a card and write down the tds  reading from your ro only then write down you reading of you di and check in a day or two. I am sure its the resin Mate. To fill your refill place one of the sponges in the fill the RESIN THEN ANOTHER SPONGE AND THE LID AND REPLACE IN DI VESSEL. i BELIEVE THIS RESIN IS NOT THE QUALITY IT IS SOLD AS. mine WAS SOLD AS TULION R115 i HAVE USE THE BRAND FOR  3 YEARS and is always lasted.I think its a dud or recycled product.
anyway i have found this on you tube,
http://www.youtube.com/watch?v=AvaNSP_LP0w

Title: Re: DI problems
Post by: barry mallett on September 29, 2011, 12:29:19 am

TAP WATER  CANT BELIEVE IT . everyone knows it should be salt water  :o