Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Ola Normann on September 23, 2011, 12:24:57 pm
-
Hey guys!
I am going to set up at static system very soon.
And I have one question.
Should I have the DI in the cars, or should I just get one DI on the static system?
-
Entirely depends if u need facility to make fast batch of pure I.e. Connect vessel to customers tap if not then I would just put it on static and be done that way job done in 1 go but u can still carry a di in car as well
-
If ur lucky like me and ro gets it to 002 then no di required used to be 6 but changed pre filters which were well over due
-
Thanks for your good advices, very kind of you :)
Do you have several RO filters then?
And what kind of filters do you use?
-
2 pre filters 20 inch sediment and carbon then 4040 HF5 then 7 litre DI but don't really need Di all boosted to about 80ish PSi
-
I carry 2 do vessels in van so that the water goes through the di before hitting the glass just so I know it's always 000 Tds rather then risk it rising in static tank or tank in van.