Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Pope vader on September 09, 2011, 06:14:18 pm
-
i can use my pump and flow on 99, but if i remove my flow control will the pump be any faster
-
No, 99 gives you the same flow as you would get with no controller. Anything sub 99 is giving you lower flow rates. for a faster flow rate, you'll need a higher rated pump. Unless you currently have it fixed in a higher position than the tank?
-
i can use my pump and flow on 99, but if i remove my flow control will the pump be any faster
Hi mate if you remove the flo con and use the pump on its own then yes it will be faster. i know this because i have done it.
dave
-
why would you want to run the pump faster than 99 ?
im guessing you have the 3 button digital version .
is the flow rate not good at 99 ?
what pump do you have ?
Rich
-
i got a flojet from gardiners, and need to run as a two man next week, but have fan jets and need as much power as possible, will give it all a try to moz and see what happens, i use to be able to run two brushes with pencil jets no probs but want to run fans
-
The fans could be your prob mate , i assume you have them already ?
If this is the case , your pump is gonna struggle to push the water through fans more so than pencils , due to the build up of back pressure you could find your pressure switch cutting in and messing everything up for you , when introducing a second pole .
Worth getting a second opinion though !
Rich
-
will set it up tomoz and see what happens, worse case use my pencil brushes
-
Yes i think the pump will go faster than going through a controller. By how much i dont know but i know my controller doesnt let the pump go full, it goes fast enough for me but if i didnt have it i would have more pressure.
I agree about the fan jets becoming a problem, one pole off one pump ok with fans but may struggle with 2 men one pump on fan jets...worth a go tho, let us know.
-
well set it all up, 1 pump 2 reels 2 fan jets, works fine, even get it down to 60 and it still cleans, left it running for a 15 mins, was fine, will find out what it is like on monday on a full day
-
why would you want to run the pump faster than 99 ?
im guessing you have the 3 button digital version .
is the flow rate not good at 99 ?
what pump do you have ?
Rich
Hi rich i run my shurflo 5.2lt 100psi straight of the van battery with no flo con for 3/1/2 hours today with fan jets with no problems what so ever. dave
ps i have got the 3 button digital version but some times 99 is not fast enough and on top of that i use 1.5mm jets
-
will set it up tomoz and see what happens, worse case use my pencil brushes
i mate why not use both if you look at this pic i have got 2 fans and 2 pencils its just a case of swapping over the pipe
(http://i646.photobucket.com/albums/uu184/s2none/P1000190.jpg)
-
i tried to use both the pencils and jets on a brush i have at the same time and it didnt work as most of the pressure goes out of the pencils, i wanted to run 2 brushes both with fans
-
Think he meant you could swap over if needed
-
Think he meant you could swap over if needed
thanks matt you are right i did mean that.