Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: LHill on August 26, 2011, 04:44:35 pm
-
Hi All
I have just ordered a hf5 4040 from gaps water, and was wondering if I cannot get enough pressure on-site would it be possible to use either a 60psi or 100psi shurflo pump as a booster pump?
-
if you have got one give it a try ;D,i bought a second hand booster pump off e bay for twenty quid and it does not look much different to a flojet or surflo,just make sure it does not run all the time,i use a timer plug with every other segment on so it gives 15 mins on 15 mins off this has really made a big differnce to how quickly i can produce water and how efficient the set up is
-
this sounds interesting, as I have an old shurflo pump and an hf5 myself
the ro is set up in my flat as a static (but no tank, I feed it straight to my van)
could I wire it to the mains by way of a transformer ? if so what would I need to do ?
would I put the pump after my pre filters ?
Simon
-
I guess you could try that.
I have a 300gpd atm with a booster pump and I fitted that after the pre filters, the sediment filter helps to protect it.
I guess for a test you could use your leisure battery to power the pump.
and then if that worked and you wanted something bit more permanent get something like this
http://www.limitedgoods.com/itemView.php?ProdID=567018&source=FroogleUK&medium=free&campaign=FroogleUK_InStock
-
if you have got one give it a try ;D,i bought a second hand booster pump off e bay for twenty quid and it does not look much different to a flojet or surflo,just make sure it does not run all the time,i use a timer plug with every other segment on so it gives 15 mins on 15 mins off this has really made a big differnce to how quickly i can produce water and how efficient the set up is
I have a booster pump from pure-freedom but I dont think it will work with a 2500gpd system.
-
Done it with a 100psi shurflo and didnt work .... sorry to be the bearer of bad news
-
I have tried, but the flow rate was high and the pressure switch will cut the pump out.
-
you could easily bypass pressure switch
-
Done it with a 100psi shurflo and didnt work .... sorry to be the bearer of bad news
ok thanks, but why do you think this was ? had you bypassed the pressure switch as elite mike had suggested or is it just not powerful enough given the size of the membrane ?
-
Did the same as blue frog 100psi shurflo 100gpd ro , no pressure switch ,.......DID NOT WORK !
Rich
-
Did the same as blue frog 100psi shurflo 100gpd ro , no pressure switch ,.......DID NOT WORK !
Rich
i done it with one of these pumps temporarily for nearly 2 years with the PS bypassed it worked perfectly 8)
and a few members of this forum have seen it working .
http://www.ebay.co.uk/itm/Marine-Automatic-Fresh-Water-Pump-12v-2-6-lt-min-70psi-/380294058896?pt=UK_CarsParts_Vehicles_BoatEquipment_Accessories_SM&hash=item588b4ad390#ht_1048wt_905
andy atkinson and his mrs
rz
ty8s
squeaky clean
malc
and terry jones
so if it can be done with this pump i cannot see why it cannot be done with the sureflow.