Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: STEVE-UK on August 22, 2011, 06:54:38 pm

Title: anyone got wiring/instruction manual for flow controller
Post by: STEVE-UK on August 22, 2011, 06:54:38 pm
As title says, its the window cleaning warehouse version but looks simular to most of the others, heres a link to the model

http://www.windowcleaningwarehouse.co.uk/shop/new-products/wcw-digital-flow-controller.html
Title: Re: anyone got wiring/instruction manual for flow controller
Post by: t h on August 22, 2011, 07:18:59 pm
Hi Steve
 i have  a copy in van call me i am in brighton tomorrow
Tim
divine shine 07836 776398
Title: Re: anyone got wiring/instruction manual for flow controller
Post by: Alex Gardiner on August 22, 2011, 07:26:51 pm
Here are instructions for these type of flow controllers.  :)

Title: Re: anyone got wiring/instruction manual for flow controller
Post by: STEVE-UK on August 22, 2011, 07:45:15 pm
Cheers chaps....Its flashing PS which looks to be pressure switch, do these controllers require the pump to have the pressure switch connected as opposed to the varistream being without
Title: Re: anyone got wiring/instruction manual for flow controller
Post by: STEVE-UK on August 22, 2011, 07:50:15 pm
Alex , i have been meaning to call your office as i got the message that the 61 foot  supermax is put by for me,ive just got back from holiday so will call tomorrow with payment details, can you tell me if the 61ft if more rigid than the 50 ft or approx the same
Title: Re: anyone got wiring/instruction manual for flow controller
Post by: Alex Gardiner on August 22, 2011, 10:37:21 pm
Cheers chaps....Its flashing PS which looks to be pressure switch, do these controllers require the pump to have the pressure switch connected as opposed to the varistream being without

These controllers do work fine with the pressure switch connected. When it flashes PS it means that the dead-end calibration is set too low so the pressure switch is cutting in. Press down the outer two buttons and then press the up button until it gets to about 45 then press the enter button and it should be OK.
Title: Re: anyone got wiring/instruction manual for flow controller
Post by: Alex Gardiner on August 22, 2011, 10:39:28 pm
Alex , i have been meaning to call your office as i got the message that the 61 foot  supermax is put by for me,ive just got back from holiday so will call tomorrow with payment details, can you tell me if the 61ft if more rigid than the 50 ft or approx the same

The 61ft Super-Max is more rigid when extended due to the use of High Modulus Carbon in it's construction. This is most definitely needed at it's extra height.