Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Mike #1 on August 22, 2011, 07:39:23 am
-
dazmond when you first used you're trolley as a van mount how did you draw the water out of the tank , and what fiitings or extra did you need for it to work sucessfully , i will be fitting a 300ltr flat tank , also whats the best hose and reel combined , thanks mike
-
hi mike i bought
350L FLAT TANK
5 TON RATCHET STRAPS
HOSE REEL/100M MICROBORE and a few adaptor connectors.
i simply ratchet strapped the tank down tight using the eyelets in the van floor.put the drop pipes(that you put in your barrel) in the tank lid and plugged the hose reel in.i also got a tank elbow to screw in the bottom corner of my tank and added a short hose ready for when i get a pumpbox.
it took me about 60 mins to fit tank,assemble reel and fit hose on it and screw elbow in and add hose.job done.
hope this helps.
regards
dazmond
-
by the way i bought 100m microbore(6mm) and hose reel from gardiners.
-
pure freedom recommend only using 8mm
by the way i bought 100m microbore(6mm) and hose reel from gardiners.
-
pure freedom recommend only using 8mm
by the way i bought 100m microbore(6mm) and hose reel from gardiners.
WELL THEY ARE TALKING RUBBISH, loads of us out there using 6mm
-
thanks dazmond , i will still be using trolley for the odd restricted access , will be fitting flat tank in back of a L200 trojan pick-up