Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: L.Doubtfire - The Blade Runner on January 16, 2004, 10:26:52 pm
-
Just wondered if anyone can put forward some advice here thanks.
On the portable trolley system I`m using for pure water window cleaning
the tank has had leaks,which I have fortunatley cured (at least hope so)
I used the Ever build product called `Aquamate`.Its very similer to a sanitary
bathroom sealant /adhesive etc.Prior to having the leaks my water would stay
constant at 000p.p.m reading.Today after a few hours the reading goes so far
up to 003p.p.m.Just thought the sealant might be having some effect on the water.
If so,is there anything I could use to treat those parts covered by the sealant.
Anyone else had these related problems at all? All replies much appreciated.
Lewis Doubtfire,Gleem Clean Window Cleaners.
-
Where is Dom when you need him ;D 8)
-
Lewis
Do your pipes go in at the top ???
you should not get any leaks
It could be the desighn have you bought it ready made
or made yourself
The sealent used might only change the reading for a short while ???
I have used water up to 00.5 and its been OK
Mabey you just have to keep going for a few more times
Bryan Dolby
-
Thanks Dom ,
The thing is that you do actualy know what you are talking about ;D 8)