Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Lee GLS on July 08, 2011, 07:09:59 pm
-
Right, i have a clarke CBM240 (http://www.machinemart.co.uk/shop/product/details/cbm240-1in-multi-stage-water-pump/path/booster-centrifugal-pumps) pump and to make it fully automatic i fitted one of THESE (http://www.machinemart.co.uk/shop/product/details/epc1000-electronic-control-unit).
It is all wired in properly and the pump will work, but it wont turn the pump on and off when the water flow stops and starts, and it wont turn off when the water going to the pump is turned off, ive tried the reset button but still no joy, has any one else got one of these and got any suggestions?
-
all sorted, thanks for your help ;)
-
no worries mate 8)
-
no worries mate 8)
:o :D :P
-
Hi Lee
What was the problem and how did you solve it please? Are you linking it in with your float switch?
Spruce
-
Spruce, i was going to use a float switch like you said because i was moving house and going to need a static setup, now that has all fallen through, and i need to keep my system in my van which is all automatic.
But now i have a booster pump, but it not automatic, so i bought the contoller in the link, but i thought that the would cut on and off instantly, but they dont, the dry run protection can take a minute to stop the pump, and when the tank in the van is full and the solenoide activates to stop the water it can take 10-15 seconds for the pump to stop, it all work now but i thought it should sense instantly.
-
Hi Lee
Good info with regard to controller to stick in the memory box in case I need to use a similar system sometime.
Thanks for that.
Spruce